- TitleFarnborough Archive
- ReferenceFARN
- Production date1904 - 1994
- Royal Aircraft EstablishmentBiographyBiographyThe Royal Aircraft Establishment (RAE) was formed in June 1918 when the Royal Aircraft Factory (RAF) was renamed, partly to avoid its abbreviation being confused with the newly formed Royal Airforce. In addition to this renaming there was also a shift away from the production that had previously been undertaken on the Establishment’s Farnborough site, and an increased focus on the research and development that was seen as its main role in the aviation industry, although a small number of aircraft continued to be constructed on site until the end of the war in November 1918. As part of this the sites function was defined as being to conduct experimental and development work on aeroplanes and engines, the testing of experimental instruments and accessories, undertaking flying instrument development for which there was little commercial demand, investigating failures within aircraft and components, liaison with industrial contractors for research purposes, technical supervision during construction of experimental machines, being available for approach for approval of designs and stressing of new aeroplanes, and the issue of airworthy certificate and of technical publications. The first director of the newly renamed RAE was W. Sydney Smith, who had replaced Henry Fowler as head of the RAF in April 1918. With the new focus on research and development he brought about some reorganisation of the departments with some being established or changed to focus on specialist areas including aerodynamics, engines, physics, instruments, metallurgy, mechanical testing, chemistry and fabrics. With the end of the First World War the RAE underwent a large reduction in staff and resources, with the numbers employed falling from 5,052 in November 1918, to 1,380 by the mid-1920s. There was a similar reduction in funding, with only 3.9% of the Air Estimate being allocated to the site in 1922, but research would continue to be conducted despite these difficulties. In 1919 there was also a shift away from purely military work as several companies approached the RAE for assistance with the design and handling characteristics of their new civil aircraft. The first Certificate of Airworthiness was also issue to a civilian aircraft at this time. As well as this 1919 also saw the beginning of the early helicopter work undertaken by Louis Brennan. Based in one of the airship sheds on the site he continued testing until 1925 when it crashed during a demonstration and the Air Ministry cut the project’s funding. In 1920 the Wireless and Photography department was formed, illustrating the growing importance of these technologies, and more sophisticated equipment was installed in the structures department to test wing loading, replacing the previous method of using sandbags to weight aircraft components. The research activities of the RAE continued throughout the 1920s. These included comparisons between the results gains from full scale flight tests and those from models tested in wind tunnels as well as theoretical studies of stability and other flight characteristics. Other work included the development of an early variable pitch propeller and the testing of many of the new types of aircraft that were being developed by numerous companies. The development of oxygen systems for aircrews was also undertaken due to the increased altitudes that were being encountered both in tests and in everyday flight. Also, during the 1920s a great deal of research was undertaken in the development of aircraft catapults. These used a compressed air and hydraulics to launch aircraft and would be later developed for use on the Royal Navy’s large warships. Further work would be undertaken on inflight refuelling and 1927 would see the start of experiments to develop turbine engines by Alan Arnold Griffith. There was also a great deal of work undertaken on the RAE Larynx, an pilotless aircraft designed as a guided anti-ship weapons and seen as a predecessor to both cruise missiles and modern drone aircraft. Seven of these were produced and tested and, although it did not enter production, it was the start of the development of numerous drone aircraft that were used for gunnery targets, such as the Queen Bee that was used by the Royal Navy during the 1930s. The development of photographic equipment was an important area of development in the interwar period and in 1929 the RAE produced the first of its F24 aircraft cameras. This was fitted to many aircraft during the Second World War for aerial reconnaissance and would continue to be used until the mid-1950s. An Instrument and Photographic Department was also formed to help with the development of equipment for aerial photography, reflecting its growing importance both in military and civilian circles. The problem of spinning in aircraft was also tackled at this time with the production of a 12ft wind tunnel in which to conduct tests. This was followed in 1935 by a 24ft tunnel that was used to test air and water-cooled engines and other full size components. A 660ft tank was also built to test the hydrodynamics of seaplane hulls. Finally, in 1937 an additional wind tunnel was constructed that was able to operate at 600mph, reflecting the growing performance of aircraft at the time. The declaration of war in August 1939 ““made little fundamental change in the policy and work of the Establishment since it was the expected culmination of what was known as the ‘Expansion Scheme’ which had been going on progressively since the adoption of a national rearmament policy in 1935”. Despite this there was a great deal of expansion with the number of staff increasing to 6,000 and new runways and hangars being constructed, which brought the airfield site up to 800 acres. Despite the site’s importance, the RAE was only bombed once during the course of the war. This occurred on 16th August 1940 when eight aircraft dropped a total of 20 bombs, although only half hit the site with the rest falling on nearby houses. Three members of staff were killed, and work was disrupted for three days but would then resume, with some operations being dispersed to other sites. During the war a large number of new systems were developed, including a gyro gun-sight that improved the accuracy of fighter aircraft and early forms of airborne RADAR, which were tested by the Radio Department. Tests on captured enemy aircraft were also undertaken as were early tests on models of the Gloster E28/39, Britain’s first jet aircraft. Advances were also made in aerial photography and a new bombsite was also developed as was a rocket propelled catapult designed to fire aircraft from merchant ships. In August 1941 Beatrice Shilling, known as Tilly, developed the R.A.E. Restrictor, better known as Miss Shilling’s Orifice. This was developed to prevent loss of power in aircraft performing negative ‘g’ manoeuvres during combat and was a simple washer fitted to the fuel pipe that prevented the engine from being flooded by fuel. Although it did not completely solve the issue it did allow for quick low ‘g’ manoeuvres to be conducted and bought time for a more permanent solution to be developed by Rolls-Royce, in the form of pressure carburettors. With the end of the Second World War in 1945 the RAE again underwent a reduction in staffing. From a wartime peak of around 6,000 this dropped to approximately 3,000 as many of the site’s personnel returned to the civilian industry. Also, in March of the same year research into piston powered aircraft ceased and all attention was focused on jet propulsion. In November 1945 the RAE was opened to the public in order to illustrate the site’s war work. Not only was the site opened but there was also a display of British and German aircraft which drew a great deal of attention. In the immediate post war years research continued, although at a much reduced intensity, and included a great deal of research into transonic flight characteristics. Some of this was undertaken using rocket propelled models dropped from aircraft in flight. Some research was also conducted on the Miles M.52 prior to this project’s cancellation. A further area of investigation at this time was the installation of flexible decks on aircraft carriers. This hope to replace the undercarriage of aircraft with a sprung rubber deck on ships. It was hoped that this would increase the performance of aircraft, but it was never implemented in service. A more successful design was the angled flight deck, which was proposed by the Naval Aircraft Department and, after a model was produced and refinements implement, this was adopted as standard for all aircraft carriers at the time. In 1948 the Society of British Aircraft Constructors moved their annual display to Farnborough. This would continue to be held annually on the site until 1962, when it changed to a biannual display in partnership with the Paris Air Show. Although initially this was only open to British designs from 1974 it became the Farnborough International Airshow. In 1952 the air show was the site of an major accident when a de Havilland DH110 broke up during a display and crashed into the crowd, killing 31. During the 1950s a substantial amount of testing was undertaken on many new civilian designs if aircraft and, even though some of these did not enter service, a great deal of technical information was gained from the experiments. Helicopters also began to undergo testing at the RAE with numerous aspects of their design being tested. 1952 also saw the arrival of an Avro 707 which was used to examine the aerodynamic properties of delta wings, data that would be later used in the design of Concorde and the Avro Vulcan. Following the loss of two Comet aircraft in 1954 the RAE was the site of a major investigation into the causes of their loss. Parts were salved from both of the crashes and brought back to Farnborough where they were pieced back together. Further to this a large water tank was built where a complete Comet body was repeatedly pressurised to investigate the effect of repeated pressurisation and depressurisation. Other Comets were also sent to the RAE to conduct flight trails and other investigations. All of these tests found that the aircraft had been lost due to the failure of the structure and led to a redesign of the type, as well as a greater understanding of the science of metal fatigue. By 1958 the structure of the RAE had developed to have the following departments: Aerodynamics, Armament, Armament and Instrument Experimentation, Carrier Equipment, Chemistry, Electrical Engineering, Experimental Flying, Guided Weapons, Instruments, Instrument and Photographic, Mathematical Services, Mechanical Engineering, Metallurgy, Naval Aircraft, Radio, Rocket Propulsion and Structures. 1958 also saw the beginning of calculations on the TRIDAC analogue computer as well as the launch of many of the rocketry projects that the RAE was involved in. These were the Skylark and Black Knight rockets that were both tested at the Woomera facility in Australia. During the 1960 the RAE was involved in a number of projects ranging from the development of the UK3 satellite, the first UK satellite, and the TSR2 aircraft to the invention of high strength carbon fibre. RAE scientists would also be present at the first launch of the Blue Streak rocket in 1964. This period also saw work undertaken as part of the development of Concorde, including testing the airframe for the effects of heat and stress. In 1970 the Royal Aircraft Establishment was involved in the launch of the R1 satellite by the Black Arrow rocket from the Woomera test site. This was the responsibility of the space department and built on the work they had undertaken on the previous Black Knight system. They would also have design authority for the Prospero satellite that was launched in 1971 and the Ariel IV, launched in 1973.`` 1970 also saw the opening of the RAE Museum on the site. For the rest of the 1970s the RAE was involved in the development of satellite and senor systems, for both military and civilian uses. The increase in importance of the satellite research was demonstrated in 1988 when the RAE changed its name to the Royal Aerospace Establishment. On 1st April 1991 the Royal Aerospace Establishment merged with the Admiralty Research Establishment, the Aeroplane and Armament Experimental Establishment, the Royal Armament Research and Development Establishment and the Royal Signals and Radar Establishment to form the Defence Research Agency. This brought together all of the previously independent Defence Research Establishments before it was itself merged with other departments to form the Defence Evaluation and Research Agency in 1995. Research flying would continue at Farnborough under these new institutions until 1994 when this end and in 2003 all Ministry of Defence operations on the airfield ceased.
- Scope and ContentThis collection was brought together by the Royal Aircraft Establishment's museum is composed of a wide variety of material relating to the institution's history. This includes a large number of photographs showing the Farnborough site and the work that was undertaken there including various experiments, the work undertaken on the Black Arrow program, including launches at Highdown and Woomera, examples of the instruments that were undergoing testing and buildings that were erected on site for numerous different purposes. There are also a collection of 8 albums entitled ‘O’Gorman Photographic Record’ that were produced by Mervyn O’Gorman, head of the site between 1909 and 1916, showing aircraft being tested and experiments that were undertaken at Farnborough whilst he was at the site. Beyond this there are also numerous reports produced by the RAE relating to various areas including the protection of aircraft against ice, grooved runways, tests of materials, timing of world speed records, tests on aircraft and the design of the TRIDAC analogue computer. Additional items include lecture material, press cuttings, directories, some material relating to air shows, copies of drawings including First World War Aircraft and various buildings for the site, published material, reports from other institutions and various papers relating to areas of research that were being undertaken. Some material is also included that was created by the RAE Museum itself including information and display boards relating to the RAE and its work. There is also a collection of German research books dating from the 1930s and 40s along with numerous registers and logbooks relating to experiments, especially those conducted in the wind tunnels, and work undertaken by the engineering department. The collection contains some papers relating to the work of individuals at Farnborough including some relating to aerodynamic research undertaken for Concorde by W.E. Grey and papers and lectures by Sir George Gardner. Finally there is a large collection of material that relates to the various aspects of the Comet accident investigation including photographs, drawings of the test facilities, reports on the investigation and related areas such as fatigue of aircraft pressure cabins, papers relating to the Comets used in the experiments including type records and log books and a record of events including a list of official visitors.
- Extent300 boxes and folders of material
- Physical descriptionThe collection is made up of a wide variety of mediums.
- LanguageEnglish, French, German
- Archival historyTransfered to the museum along with the object collection of the RAE Museum in 1993 and donated by the MoD in 2019. The museum objects have been grouped together into the Science Musuem Farnborough Collection.
- Level of descriptionTOP
- Repository nameScience Museum, London
- His Majesty's Balloon FactoryBiographyBiographyThe origins of His Majesty’s Balloon Factory can be traced back to 1862 when Captain F Beaumont and Lieutenant George glover attempted to introduce ballooning to the British Army, after seeing its successful employment in the American Civil War. This was unsuccessful as the War Office was unwilling to invest the extensive resources require in a ‘time of profound peace’. It wasn’t until 1878 that it was accepted there was a need for balloons in the army and as such Captain James Lethbridge Brooke Templer and Captain H.P. Lee were employed at the Woolwich Arsenal to design and build them. This became known, unofficially, as the School of Ballooning and, after some initial designs were produced, it was moved to Chatham. Here, in addition to experiments into airship fabric and the production of hydrogen, there were also developments relating to the design of winches and the use of traction engines. In 1892 the School was again moved this time to Aldershot, in order to bring it into the mainstream of the British Army. Here some experiments with man-lifting kites were conducted by Captain B.F.S. Baden-Powell but these were quickly abandoned. On 1st April 1897 the name of the establishment was changed to the Balloon Factory. In 1903 a Committee of Enquiry was established to determine the future of British military aviation and this recommended that work on peripheral equipment, such as traction engines, should be stopped and in stead all efforts should be focused on airships, man-lifting kites, balloon winches and photographic equipment. It also recommended that the Balloon Factory should be relocated and it was later decided that a new site near Farnborough would be appropriate. By May 1905 the factory had been moved to its new site. In June 1904 experiments had been undertaken to determine the effectiveness of kites designed by Samuel F Cody. These were found to be superior to those then in use and Cody was brought in to instruct on their use, before being appointed Chief Kite Instructor in April 1906. Around the same time John William Dunne arrived and began to develop his idea of inherently stable aircraft. These designs would be tested in 1907 in Scotland but would crash before they could attain a powered flight. In December 1906 the first wind tunnel was completed at Farnborough, based on one at the National Physical Laboratory, and was used for the testing of propellers and the streamlining of struts and other components. By 10th September 1907 the factory’s first airship, Nulli Secundus, was complete and was able to undertake a short test flight. Further tests would follow and on 5th October it would fly to London, although it was unable to return due to the strength of the wind and had to land at Crystal Palace. Following this there would be further experiments on balloons as well as kites and aeroplanes, both to Cody and Dunne’s designs. On 1st April 1908 a further name change was undertaken this time to His Majesty’s Balloon Factory. Also further work would be undertaken on Dunne’s aeroplane, although further difficulties would be encountered. On 19th September 1908 Army Aeroplane No 1, designed by Cody, was completed and began ground and engine tests. Although some short hops were achieved it wasn’t until 16th October that it made its first sustained flight. This was achieved at a height of 30 feet and continued until it crash whilst trying to avoid trees. Although damaged the aircraft was repaired and further tests were conducted in January 1909. Despite the success of Cody’s design, a sub-committee of the Committee of Imperial Defence decided that the progress achieved had been limited when compared to the funds that had been required. It believed that airships were better suited to military applications and that any aeroplanes that were needed could be obtained from commercial manufactures. As a result April 1909 saw the end of the development of aeroplanes at the Balloon Factory and both Cody and Dunne ceased to be employed by it. Further changes would follow later in 1909 when the Advisory Committee for Aeronautics recommend that the factory should no longer be a military establishment but rather it decided that it should become a civilian one with a superintendent reporting directly to the War Office. This was implemented in October 1909 when Mervyn O’Gorman was brought in as the first civilian superintendent of the factory. Although the name His Majesty’s Balloon Factory was retained this would be later changed to His Majesty’s Aircraft Factory and then the Royal Aircraft Factory.
- Royal Aircraft FactoryBiographyBiographyWhat would become the Royal Aircraft factory was formed when the management of His Majesty’s Balloon Factory, based at Farnborough, was removed from the military and, although the name was retained, a new civilian superintendent was appointed who reported directly to the War Office. The first of these, Mervyn O’Gorman, took over on 19th October 1909. With this new civilian oversight, the role of the Balloon Factory was established as be to conduct experiments, research and tests as well as to prepare specifications, analyse results of tests on trial designs and to reply to queries, proposals and theories put forward by civil and military bodies. Although still known as a factory production was to be limited to the production of prototype and experimental designed not the series production of operational aircraft. Also the change of leadership had not changed the site’s focus, which continued to be airships with no work being undertaken on aeroplanes. This changed in October 1910 when the factory’s repsoncibilty was enlarged to include all forms of aircraft, including aeroplanes and man-lifting kites. In November 1910 Geoffrey de Havilland was appointed to the factory as a designer and test pilot. He brought with him his De Havilland Biplane Number 2, which, after passing an acceptance trail was purchased by the War Office. This was classifised as F.E.1, the first aircraft to be classified using the factory’s system. Throughout 1911 the site continued to develop with the construction of additional hangars for airships, known as the Black Sheds, as well as a headquarters building for the Air Battalion, which would become part of the Royal Flying Corps on its formation. On 26th April 1911 the Farnborough site was renamed His Majesty’s Aircraft Factory, although its role remained research and not production. Despite this the newly renamed factory did produced its first new design, the S.E.1. Officially this was a rebuild of a Bleriot XII, but the finished aircraft was of a completely new design to the original and they shared very few parts. Such a practice would continue with new designs being officially accounted for as rebuilds until November 1913 when the factory was given authority to produce new aircraft. 1912 saw another name change, this time to the Royal Aircraft Factory, as well as involvement in trails to determine the standard aircraft for the newly formed Royal Flying Corps. These took part on Salisbury Plain and, although no RAF design was entered, staff from the site were involved in the testing of the entries. De Havilland also flew a B.E.2 from Farnborough which allowed it to be unofficially compared to the designs produced by civilian companies. Although not the official winner of these trails this type was chosen to be the standard aircraft of the RFC. The site continued to expand in 1913, producing its first engine, the RAF1, and the first truly effective aircraft compass, the R.A.F. Mark IV. On 14th November it also received official permission to produce new aircraft to its own designs, although this had been occurring since 1910. In February 1914 ‘Tests for Aeroplanes of Private Design’ was published by the factory. This was intended to establish a consistent standard for testing aircraft. In early 1914 responsibility for the design and testing of airships was transferred from the War Office and handed over to the Admiralty for operation by the Royal Naval Air Service. This ended the Royal Aircraft Factory’s involvement in their development. At the same time the Aeronautical Inspection Department was formed from the site’s staff in order to inspect the aircraft of the RFC. Geoffrey de Havilland was appointed head of this as Inspector of Aeroplanes but would leave soon after to work for Airco as a designer. During this period the RAF would be criticised and accused of using public funds to compete with private companies for aircraft production. There was also an accusation that it was delibertly undermining these companies and, although nothing was done at the time, this would lead to a suspicion that would be exploited later. With the outbreak of the First World War, and the resultant increase in demand for aircraft, Royal Aircraft Factory designs were produced by a wide range of companies, many of which were outside the established avaiation industry. This was possible as it produced detailed drawings of all of the components required for its designs, a practice that was not always copied by other designers. Beyond this the factory also produced designs for portable hangars for use by the RFC in France and produced aircraft in order assist the private companies in keeping up with demand. The site also expanded with the construction of two wind tunnels. The 1915 introduction of the Fokker Eindecker led to the severe criticism of both the RFC and the RAF. This was mostly focused on the apparent high casualties that were being suffered in, what the press had dubbed, the Fokker Scourge which were blamed on the continued use of the obsolete B.E.2 design. This continued in 1916 as the factory continued to be criticised for its inability to produce a design that would match those produced by Germany. One especially vocal critic was the MP and founder of what would become the Supermarine Company, Noel Pemberton Billing who’s views were echoed by the popular press. As a result in March 1916 a committee was appointed to determine if the resources of the RAF were being properly utilised and if there were any areas for improvement. Although the resulting report would not criticise the factory or its staff it did result in its superintendent, Mervyn O’Gorman, being transferred to a position as consulting engineer to the Director-General of Military Aeronautics. On 21st September 1916 Henry Fowler, chief mechanical engineer of the Midland Railway, was appointed as O’Gorman’s replacement. Under his leadership the RAF would continue to develop new aircraft types along with instruments and research techniques. By 1918 the factory was focused on research and experiment rather than production, which was mainly continuing in order to help meet the demands of the war and would cease with the armistice. In March 1918 Fowler would leave and in June the name of the site would change to the Royal Aircraft Establishment, partly to avoid confusion with the newly formed Royal Air Force and partly to reflect the new focus on research as opposed to production.
- De Havilland Aircraft Co LtdBiographyBiographyThe De Havilland Aircraft Company was formed as a result of the of the sale of Airco, where Geoffrey De Havilland had been chief designer, to BSA. Due to the financial difficulty that Airco was in when it became part of BSA the decision was taken to liquidate it and the company’s assets were placed for sale. They were bought by de Havilland, with the help of an investment by George Holt Thomas, who was able to use them to found his own company at the Stag Lane Aerodrome, near Edgware. Initially work was focused on maintaining and providing spares for surplus DH.4 and DH.9 aircraft that had been produced by Airco and were being operated by various civil organisations. Beyond this the company focused on the growing civilian market by continuing with the development of the DH.18 airliner, which had also begun by Airco. During 1924 Alan Samuel Butler became chairman of the De Havilland Aircraft Company Ltd following a large investment that had result from an aircraft the company had built for him. At this time, the company was producing DH.9 and DH.9A aircraft as well as experimental designs for the Air Ministry and the DH.50 four passenger aircraft. It was also work on designs for what would become the DH.54. On 22nd February 1925 the first flight of the DH.60 Cirrus Moth, a small two seater biplane, was undertaken. This design would lead to a series of successful aircraft that were popular with private aviators and the Air Ministry. The success of this design also led to the development by De Havilland of their own engine design, as the war surplus designs they had been making use of were running out. This would become the Gipsy and was used to produce the DH.60 Gipsy Moth. The new engine development also led to the establishment of the company’s engine division in 1926. During March 1928, a new subsidiary was formed known as the De Havilland Aircraft of Canada Ltd. This was based in Toronto and built Moth aircraft as well trained Canadian aircrew. Soon after the De Havilland Aircraft Pty Ltd was established in Melbourne. In 1929 the De Havilland Aircraft Company was listed as a public company, with de Havilland himself continued in his role as technical director. At this time, the company was concentrating on the production of single and two seat biplanes, many of which were continuations of the work of Airco but which also included the Gypsy Moth, one of which was flown by Amy Johnson to Australia in 1930. They had already expanded production to include several models of airliner which included the DH84 Dragon, DH84B Dragon Express and DH89 Dragon Rapide. It had also established additional overseas facilities, beyond those in Australia and Canada, in India, New Zealand, South Africa and the United States of America. In 1931 the Gipsy Moth was redesigned to meet an RAF specification for a training aircraft. This was the DH.82 Tiger Moth. De Havilland also designed a number of aircraft with enclosed cockpits as both he and his wife were tired of travelling in open designs. In 1932 the De Havilland Aircraft Company moved to Hatfield, although the Stag Lane site was retained for the production of aircraft engines, and in 1935 De Havilland Propellers was established as a subsidiary. This was established to construct Hamilton Standard variable pitch propellers under licence. The production of these would be undertaken at a newly established facility in Lostock. Also, during the late 1930s the company would work on the development and production of the Albatross and Flamingo airliners. Production of these designs would be interrupted by the outbreak of the Second World War, although the limited number produced would find use in the Royal Air Force and BAOC. During the war, de Havilland undertook a great deal of work in repairing battle damaged Hurricanes and also produced 150 Airspeed Oxfords. In additions to this October 1939 saw the beginning of design work on an unarmed bomber that would subcontract work to furniture and coachbuilding companies, which would otherwise have a limited role in the war effort. On 3rd October 1940, the Hatfield site suffered its only direct damage of the war when four bombs hit one of the workshops killing 21 and injuring a further 70. In response the work undertaken here was later dispersed. Later in 1940 the Mosquito undertook its first flight and would later enter service with the RAF in July 1941. Also at this time, the company developed both the Goblin jet engine and the Vampire which it was used in. This would undertake its first flight on 20th September 1943 and achieved a speed of 500mph in 1944, but production would not begin until after the end of the conflict. In addition to this it would be the first jet powered aircraft to land on an aircraft carrier in December 1945 when Lt Cdr Eric ‘Winkle’ Brown landed one on HMS Ocean. De Havilland’s development of civilian airliners would also continue during this period. In late 1944 it would begin design work on a small aircraft to meet the type 5B specification that had resulted from the Brabazon Committee. This would become the Dove, which would first fly on 25th September 1945, on the 25th anniversary of the company, and would be later developed into the larger Heron. Both of these would be constructed at a new site, acquired in 1948, at Hawarden Airport also known as Broughton. During 1946 the company also undertook work aimed at breaking the sound barrier. In order to do this a new design, the tailless DH.108 Swallow, was produced and this was first flown on 15th May 1946. Although it would be the first aircraft outside North America to fly supersonic, achieving this on 7th September 1948, it only achieved this after one of the aircraft broke up in flight on 26th September 1946 killing the company’s chief test pilot, Geoffrey De Havilland Junior. On 27th July 1949 the first flight of the jet powered Comet airliner was undertaken. This had been initially developed to meet the type IV specification from the Brabazon Committee, for a high speed transatlantic mail plane, but had been changed to a passenger aircraft. The design entered service on 2nd May 1952 as the world first commercial jet airliner. 1949 also saw the first flight of the Venom fighter, which was based on the previous Vampire design but with a more powerful engine. In 1951 the De Havilland Aircraft Company the first prototype DH.110 Vixen was completed. This was a larger RADAR equipped fighter design that was developed for use by both the Fleet Air Arm and the Royal Airforce. On 6th September 1952 it would be demonstrated at the Farnborough Air Show. After breaking the sound barrier it turned towards the crowd but broke up during the maneuverer killing both the aircrew aboard and 29 members of the public on the ground. 60 more would be injured and following the accident stricter regulations relating to aerial displays were introduced. The company would also suffer further losses during the early 1950s when three Comets would break up during flight. This would lead to a series of inquiries into these losses, as well as the grounding of all the Comets then in service. Although the design would be improved to produce the Comet 4, by the time this was introduced other designs had been introduced and orders were severely limited. During 1955 the company underwent a major reorganisation. The De Havilland Aircraft Company, De Havilland Engine Company and De Havilland Propellers Ltd all became subsidiaries of De Havilland Holdings Ltd. In the late 1950s the company would be involved in the development of the Blue Streak rocket and also formed a joint venture with Hunting Aircraft and Fairey Aviation in order to produce the DH.121 Trident, under the name Airco. This would be the last airliner developed independently by the De Havilland Company as in 1960 it would be acquired by Hawker Siddeley to form part of their aviation division. Although it would continue to operate under its own name for a short period, during which it acquired S.G. Brown from the Admiralty, this would only last until 1963 when Hawker Siddeley took the decision to discontinue the use of the various names it was using in favour of a single Hawker Siddeley brand.
- British Aircraft CorporationBiographyBiographyThe British Aircraft Corporation, often known simply as BAC, was formed on 18th July 1960 with the merger of the aviation interests of English Electric, Vickers-Armstrong and the Bristol Aeroplane Company. This was undertaken due to pressure from the British government, who had warned that it expected a consolidation of the aircraft industry, along with the guided weapons and engine industries, due to a decrease in the number of contracts it was going to offer. There was also some encouragement in the form of the contract for the TSR-2 aircraft, at the time the most advance aircraft design Britain had every produced, as well as the continuance of government research and development spending and a guarantee of aid for promising new types of civil aircraft. The ownership of the new company would split between the original owners of the constituent divisions. As such both Vickers-Armstrong and English Electric received 40% of the shares and the remaining 20% was given to Bristol. Existing designs would be produced under these existing brands and the BAC name would initially only be added to group marketing material. The group also took over the design of the Bristol 223 supersonic airliner, which would be merged with a similar Sud Aviation design to produce Concorde. The head of research and development for the new company would be Sir Barnes Wallis who remained in this position until 1971. During September 1960 the new company would acquire a 70% stake in Hunting Aircraft and at the same time would also be awarded the contract for the TSR-2. In 1961 the first BAC design was produced, the BAC One-Eleven, and the company also established a subsidiary in the United States of America under the name British Aircraft Corporation (U.S.A.) Incorporated, which was aimed at promoting sales of the company’s aircraft and guided weapons. During 1963 the group underwent a great deal of expansion and restructuring. It first acquired the guided weapons divisions of English Electric and Bristol Aircraft which it merged to form a new subsidiary, known as British Aircraft Corporation (Guided Weapons). This not only produced a number of guided missiles but also expanded to include electronics and space systems. In October BAC underwent a major change when it became a holding company and a new subsidiary was formed as British Aircraft Corporation (Operating) Limited. This took over the constituent aircraft manufacturers, Bristol, English Electric Aviation, Hunting Aircraft and Vickers-Armstrong Aircraft, which became divisions of the new company under the following names, BAC (Filton Division), BAC (Preston Division), BAC (Luton Division), and BAC (Weybridge Division). The guided weapons division would also be added into this group. The ownership of the holding company would remain with the three original companies. During 1965 BAC would undergo a major loss when the British Government cancelled the TSR-2 project due to increasing costs. This was a major blow to the company but it was able to survive due to the success of its One-Eleven airliner. In 1966 the group would form a joint company with Breguet under the name SEPECAT. This was established to develop a new strike aircraft for the British and French air forces and would eventually result in the Jaguar. The year would also see Rolls Royce acquire the Bristol Aeroplane Company so that it could amalgamate its engine business with that of Bristol Siddeley Engines. As a result, it would also acquire the 20% Bristol held in BAC. Although Rolls Royce initially stated that they did not wish to take over these shares they did not initially dispose of them and it wouldn’t be until the company went bankrupt in 1971 that Vickers and the General Electric Company, which had acquired English Electric in 1968, were able to purchase the 20% share. As well as this in September 1966 the Minister of Aviation, Tony Benn, announced that he believed that BAC and Hawker Siddeley should be merged into a single company. Despite this BAC’s success with the One-Eleven airliner and large defence contract with Saudi Arabia made it unlikely the parent companies would be willing to sell their shares and the proposal was soon dropped. The British Aircraft Corporation would be a major opponent to the Airbus proposal during 1967, arguing instead in favour of its own design, the Three-Eleven. This design was initially ordered by British European Airways, but government pressure cancelled this and replaced it with the A300 design. As a result, BAC would not be involved in Airbus and it would be Hawker Siddeley that was the British representative, producing the wings for the new aircraft. On 1st August 1968 British Aircraft Corporation Limited, the holding company of the group was renamed British Aircraft Corporation (Holdings) so that the operating subsidiary could be renamed British Aircraft Corporation. The newly named company would enjoy a major success when the first Concorde protype flew on 2nd March 1969, followed by the first British Concorde’s flight on 9th April the same year from BAC Filton. The design would eventually enter service with British Airways and Air France on 24th May 1976. The same year would also see the company forming a joint enterprise with Messerschmitt-Bölkow-Blohm, Fiat and Fokker. This was known as Panavia Aircraft GmBH and had been established to produce a multi role combat aircraft, which would become the Tornado. On 29th April 1977, despite opposition from BAC and as a result of the Aircraft and Shipbuilding Industries Act, the British Aircraft Corporation was nationalised. Along with Hawker Siddeley Aviation, Hawker Siddeley Dynamics and Scottish Aviation it would be merged into the newly formed British Aerospace.
- British Aerospace plcBiographyBiographyBritish Aerospace, often abbreviated to BAe, was an aerospace and defence company formed on 29th April 1977. This was a result of the Aircraft and Shipbuilding Industries Act which merged the British Aircraft Corporation, Hawker Siddeley Aviation, Hawker Siddeley Dynamics and Scottish Aviation into a nationalised company. The new company controlled a large part of the British aviation industry and was the largest defence contractor in Europe. In 1979 the company joined the Airbus consortium, acquiring a 20% share. The British government had previously withdrawn from this project although Hawker Siddeley had continued to be involved as a contractor producing wings for their aircraft. In 1981 the company underwent a major restructuring. On 1st January the statutory corporation was transferred to a limited company and this was reregistered as British Aerospace PLC. It was then gradually privatised as 51.6% of the shares were sold to the public in February with the remaining 48.4% being sold in May 1985. Despite this the British government retained a single golden share that gave them the power to block foreign control of the company. Also during 1985 BAe would be the primary contractor for the Al-Yamamah arms deal. During the late 1980s British Aerospace would become involved in serval joint ventures and acquired a number of companies which diversified its operations away from aircraft manufacturing. The first of these was undertaken in cooperation with Alenia Aeronautica, Construcciones Aeronáuticas SA and DaimlerChrysler Aerospace AG to form Eurofighter GmBH which would go on to develop the Eurofighter Typhoon. During 1991 it would also form another joint venture with the Sema Group to form a naval defence company, BAeSEMA. The company would also acquire Royal Ordnance on 22nd April 1987, the Rover Group in 1988, Heckler and Koch in 1991 and 30% share in Hutchison Telecommunications. Despite the expansion undertaken during the 1980s BAe would begin to suffer some difficulties during the early 1990s as its property company struggled, Rover sales dropped and the British government undertook a defence spending review. As a result the decision was taken to divest the company of its non-aerospace or defence activities. As a result in 1993 BAE Corporate Jets Ltd and Arkansas Aerospace Inc were sold to Raytheon and in 1994 the Rover Group was sold to BMW whist British Aerospace Space Systems were sold to Matra Marconi Space. As well as this in 1998 it reduced its shareholding in Orange to 5% and acquired the UK operations of Siemens Plessey Systems from Siemens AG. By the late 1990s the consolidation of defence companies was becoming a major issues especially in Europe. The formation of Lockheed Martin and the merger of Boeing and McDonnell Douglas put serious pressure on European companies to consolidate their operations. Initially it was thought that BAe would merge with DaimlerChrysler Aerospace AG but this was put on hold when it emerged that GEC was selling its defence electronics business, Marconi Electronic Systems. It was believed that this may be acquired by an American company. As a result the decision was taken to merge this company with British Aerospace forming a company that was initially known as New British Aerospace. The new company would be formed on 30th November 1999 under the name BAE Systems.
- Handley Page LtdBiographyBiographyHandley Page Limited was an aircraft manufacturers based in Cricklewood, and later Radlett, founded by Frederick Handley Page. Prior to establishing his company Handley Page had experimented with several aircraft designs, being fired from his pervious employed for conducting these on their premises. As a result, on 17th June 1909, he established his own company in order to manufacture and sell his designs, making it the first company in Britain established to manufacture aircraft. Initially the company was based in Barking, but it would later move to Cricklewood, where the company had an airfield from which aircraft could be flown. During the First World War the company produced the Type O bombers which were designed to attach German Zeppelin yard, with the later intent of bombing Berlin. The first of these to enter service was the O/100 which was followed by the O/400 in 1918. The company also produced the V/1500 which was capable of attacking Berlin from East Anglia but was not used due to the end of the war. At the time these aircraft were the largest to be produced in Britain and were some of the largest in the world. Following the end of the war a Handley Page V/1500 was shipped to Newfoundland in order to attempt the first trans-Atlantic flight. This aircraft, named ‘Atlantic’, would miss out on this as Alcock and Brown would complete the feat in June 1919 using a Vickers Vimy. It would be later used to transport the first airmail from Canada to the United States. Also at this time, the company would adapt a number of its O/400s for passenger use. These would be employed on the London to Paris route, operated by Handley Page Transport Ltd, also established by Frederick but not part of the aircraft manufacturing business, and which would later be merged with other operators to form Imperial Airways. A final development that occurred during 1919 was the introduction of the company’s first purpose built airliner, the Type W. This was a development of the wartime O/400, as the V/1500 was deemed to large although some of its components were used on the design. This had a fully enclosed passenger compartment but with an open cockpit and would continue in service until 1931. During the 1920s the majority of the Handley Page’s revenue was generated from the licence fees paid by other companies for the use of their design of slat. This was mounted on the front of an aircrafts main wing and was designed to improve airflow at high angles of attack. Gustav Lachmann would also develop this at the same time would be later employed by the company. In 1929 the Cricklewood Aerodrome would be closed in favour of a new one constructed at Radlett, where all testing and final assembly would be completed. The factory at Cricklewood would be retained in order to manufacture aircraft components until 1964. During 1931 the company would produce a pair of airliner designs to a specification issued by Imperial Airways. These were the HP.42, designed for use on the long range routes to the far east, and the HP.45, for use on shorter European routes. These were the largest aircraft in regular service at the time and were all given names beginning with H. Despite the numerous designs the company produced during the inter-war year it would not be very profitable as the airliners it produced were only ordered in very limited numbers. This would change with the raise in European tensions in the late 1930s, which would see the company returning to production of military aircraft. Initially this was the HP.52 Hampden and HP.54 Harrow, both of which saw service in the early stages of the Second World War before being transferred to use as transports. These would be followed by the HP.57 Halifax, which was developed from a unsuccessful twin engine design, and would become the second most widely used four engine bomber, following the Avro Lancaster. It would also be employed as a transport and glider tug. The company would also work on the HP.75 Manx, which was a twin engine tailess aircraft, but this would suffer a series of issues that would mean it was scrapped after only 17 hours flight. In 1947 Handley Page purchased the assets of Mile Aircraft, which had gone bankrupt, including the designs, tools and jigs for the Miles M.52 Supersonic aircraft. The company also acquired the Woodley site and began operations as a subsidiary, Handley Page (Reading) Ltd, which also took over the remaining assets of the dormant Handley Page Transport Ltd. The company would produce the Herald airliner with the HRP model number. In the post war years Handley Page was most well-known for its involvement in the producing of one of the three V-bombers introduced in the 1950s. These were the British nuclear deterrent and were developed to Specification B.35/46, which aimed to replace the piston engine powered Lancasters and Lincolns then in service. In response the company developed the HP.80, a crescent wing four engine design, which became the Victor and was first flown in 1952. During 1956 one of these aircraft underwent tests during which it broke the sound barrier, one of the largest aircraft to achieve this at the time. Following this type would enter service in 1958 and would remain in service until 1993, although they had been converted to airborne tankers in the late 1960s when they were deemed surplus to requirements. In 1961 the company produced the HP.115, which was designed to test the low speed handling of a delta wing aircraft. This was part of the research that led to the production of Concorde and would be used until 1974. During 1970 this aircraft would be flown by Neil Armstrong, after he had been previously refused the opportunity by NASA in 1962. During the late 1960 Handley Page resisted government pressure to merge with other aircraft manufacturers. As a result, it did not become part of the two main manufacturers, Hawker Siddeley and the British Aircraft Corporation, but it also meant that it was unable to compete for government contracts or produce large commercial aircraft on a the same scale as these two companies. Although they developed the Jetstream as a commuter aircraft this was not enough to prevent the company going bankrupt. In March 1970 it went into voluntary liquidation and was wound up. The Jetstream continued to by produced by Scottish Aviation and later British Aerospace.
- De Havilland, Geoffrey
- Cody, Samuel FranklinBiographyBiography1861-1913, showman; aeronautical designer, American
- Ministry of SupplyBiographyBiographyThe Ministry of Supply was established in 1939 with responsibility for the Royal Ordnance Factories and for the supply of munitions, clothing etc to the War Office and Air Ministry. In 1946 it took over the responsibilities of the Ministry of Aircraft Production after it was abolished. In October 1959 the civil aviation functions of the Ministry of Transport and Civil Aviation were transferred to the Ministry of Supply, which was simultaneously disbanded and reconstituted as the Ministry of Aviation; at the same time supply functions, with the exception of those relating to aircraft, guided missiles, radar and electronic equipment, were returned to the Air Ministry and War Office.
- Ministry of DefenceBiographyBiographyFormerly constituted in January 1947 with responsibility for the inter-relations of the three armed services and their supply. On 1 April 1964 a unified Ministry of Defence under a single Secretary of State absorbed the Admiralty, War Office and Air Ministry. In 1971 the defence functions of the Ministry of Aviation Supply were absorbed when the MoD took over responsibility for supplying military aircraft and guided weapons.
- Conditions governing accessOpen Access
- Conditions governing ReproductionCopies may be supplied in accordance with current copyright legislation and Science Museum Group terms and conditions.
- AppraisalThe collection has been reviewed to remove duplicates and photocopies.
- System of arrangementThe collection has been arranged as closely as possible to the way in which it was in the RAE Museum rather than the that employed by the original departments.
Creator
Associated people and organisations
Related object
Hierarchy browser