The English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.

In 1959 Associated Electrical Industries (AEI) created a self-contained company named AEI Traction Division to control the railway activities of both Metropolitan Vickers Electrical Company Ltd and British Thomson-Houston (BTH). Included in this company were the interests of the Metropolitan-Vickers General Railway Signal Co., (later to become GEC General Railway Signal). The newly formed company established its headquarters, at Trafford Park, Manchester, and operated from three other sites, Attercliffe Common in Sheffield, Rugby Works, and Stockton Works supplying traction motors, machines, control gear and mechanical parts of locomotives. AEI Traction Limited’s product range encompassed electric and diesel-electric locomotives; electrical equipment for tramcars, trolley buses, trolley mining locomotives, traction motors and gears. In 1969 AEI Traction Division merged with English Electric Traction to form English Electric-AEI Traction Division.

Tasmanian Government Railways (TGR) was formed in 1872 after it began to take over failing privately owned railway lines with its headquarters in Launceton, Tasmania. TGR owned lines ranging from Deloraine, the North West Coast, Hobart and Launceton to Antill Ponds and Turnbridge. In 1978 TGR was amalgamated with the Commonwealth Railways, South Australian Railways to form the new Australian National Railways Commission, operating as Tasrail.

The New Zealand Railways Department (NZR) also known as New Zealand Government Railways was a government department created in 1880. NZR acquired a number of private railways from 1886, including the Waimea Plains Railway Company and the New Zealand Midland Railway Company in 1898. The acquisition in 1908 of the Wellington and Manawatu Railway Company and its railway line marked the completion of the North Island Main Trunk from Wellington to Auckland after 23 years construction. In 1923 the West Coast line opens with the Otira tunnel containing the nation's first electric railway. In 1945 the South Island main trunk from Christchurch to Picton is completed and by 1953 the rail network reached its peak in terms of network reach at 5,689 kilometres. Between 1959 and 1971 numerous country branch lines close across the country as the steam era ends as NZR re-equipped lines with modern diesel locomotives. The NZR was reorganised in 1982 to become an independent commercial company called the New Zealand Railways Corporation.

The British Thomson-Houston Co. Ltd., (BTH) was created as a subsidiary of the General Electric Company, USA in 1896 to exploit the sale of products in the United Kingdom. BTH was a reconstruction of an existing firm, Laing, Wharton and Down (1886). The BTH manufacturing works were based at Rugby, Warwickshire and the company’s products included induction motors, alternators, switchgear, turbo-generators and turbines, as well as a large number of rotary converters and motor converters, primarily for chemical plants. During the First World War, BTH’s most significant contribution was the development of marine apparatus for the naval service. The 1920s saw a period of vast expansion for the company with new extensions built at many of its factories such as Willesden, Birmingham, Chesterfield and Lutterworth. BTH amalgamated with Metropolitan-Vickers Electrical Company Ltd to form Associated Electrical Industries (AEI) in 1928 although both companies retained their separate identities and continued to compete for the same contracts. BTH developed manufactured electric torpedoes and electrical components for aircraft engines, munitions, etc., during the Second World War and in 1935 independently of each other, BTH and Metropolitan-Vickers were the first two companies in the world to construct jet engines.

The Vulcan Foundry was originally opened in 1830 at Newton-le-Willows, as Charles Tayleur and Company. It initially produced girders for bridges, switches and crossings, and other ironwork following the opening of the Liverpool and Manchester Railway. Robert Stephenson became a partner in 1832, and in the same year, the first locomotives ‘Tayleur’ and ‘Stephenson’ were delivered to the North Union Railway. By 1840 locomotives had been delivered to five European countries and to North America. The company became The Vulcan Foundry Company in 1847 and acquired limited liability in 1864. From the beginning of 1898, the name changed again to The Vulcan Foundry Limited, dropping the word 'company.' Vulcan locomotives were exported all over the world, with the first locomotives for Russia and Japan supplied in 1837 and 1871 respectively and a long association with India began in 1852. First World War production included shells, gun mountings and mine sweeping equipment. The first non-steam locomotive, an electric, was produced for India in 1929. The first diesel locomotive design commenced in 1932/33 and an agreement was reached with A/S Frichs in Denmark. The English Electric 6K engine was used from this time. The “Waltzing Matilda” tank was developed in 1938 and produced in large numbers and over five hundred ‘Austerity’ steam locomotives were produced for the War Department. Other wartime production included gun mountings and torpedo parts. In 1944 Vulcan acquired the locomotive business, Robert Stephenson & Hawthorns Ltd, based in Newcastle-upon-Tyne. In 1946 the company began working with the English Electric Company producing diesel and electric locomotives and became part of the English Electric Group in 1955. All locomotive building from Preston was transferred to Vulcan Foundry and Robert Stephenson’s in Darlington. Under the new ownership, the works produced many locomotives for both domestic and foreign railways, notably the Deltic. The mid-sixties saw the ‘RK’/’V’ engine production at Preston moved to Vulcan and Ruston & Hornsby Ltd merged with English Electric Diesels in 1966. After the General Electric Company plc (GEC) takeover in 1968 the Ruston name was used for some time inside what became GEC Diesels Ltd in 1975. Engine production and development continued for locomotive, industrial and marine applications until after the GEC-Alsthom merger in 1989. The company took over Mirlees Engines, Stockport in 1997 and was renamed Alstom Engines Ltd.

On 18th December 1966 E. E. Baguley and the Drewry Car Co Ltd amalgamated and the company named changed to Baguley-Drewry on the 1st June 1967. The company was located in Burton-on-Trent and manufactured a variety of railcars and railway locomotives between 1911 and 1984. The company was sold to Baguley (Engineers) Ltd on 1st December 1986.