The English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.

In 1959 Associated Electrical Industries (AEI) created a self-contained company named AEI Traction Division to control the railway activities of both Metropolitan Vickers Electrical Company Ltd and British Thomson-Houston (BTH). Included in this company were the interests of the Metropolitan-Vickers General Railway Signal Co., (later to become GEC General Railway Signal). The newly formed company established its headquarters, at Trafford Park, Manchester, and operated from three other sites, Attercliffe Common in Sheffield, Rugby Works, and Stockton Works supplying traction motors, machines, control gear and mechanical parts of locomotives. AEI Traction Limited’s product range encompassed electric and diesel-electric locomotives; electrical equipment for tramcars, trolley buses, trolley mining locomotives, traction motors and gears. In 1969 AEI Traction Division merged with English Electric Traction to form English Electric-AEI Traction Division.

The New Zealand Railways Department (NZR) also known as New Zealand Government Railways was a government department created in 1880. NZR acquired a number of private railways from 1886, including the Waimea Plains Railway Company and the New Zealand Midland Railway Company in 1898. The acquisition in 1908 of the Wellington and Manawatu Railway Company and its railway line marked the completion of the North Island Main Trunk from Wellington to Auckland after 23 years construction. In 1923 the West Coast line opens with the Otira tunnel containing the nation's first electric railway. In 1945 the South Island main trunk from Christchurch to Picton is completed and by 1953 the rail network reached its peak in terms of network reach at 5,689 kilometres. Between 1959 and 1971 numerous country branch lines close across the country as the steam era ends as NZR re-equipped lines with modern diesel locomotives. The NZR was reorganised in 1982 to become an independent commercial company called the New Zealand Railways Corporation.

The British Thomson-Houston Co. Ltd., (BTH) was created as a subsidiary of the General Electric Company, USA in 1896 to exploit the sale of products in the United Kingdom. BTH was a reconstruction of an existing firm, Laing, Wharton and Down (1886). The BTH manufacturing works were based at Rugby, Warwickshire and the company’s products included induction motors, alternators, switchgear, turbo-generators and turbines, as well as a large number of rotary converters and motor converters, primarily for chemical plants. During the First World War, BTH’s most significant contribution was the development of marine apparatus for the naval service. The 1920s saw a period of vast expansion for the company with new extensions built at many of its factories such as Willesden, Birmingham, Chesterfield and Lutterworth. BTH amalgamated with Metropolitan-Vickers Electrical Company Ltd to form Associated Electrical Industries (AEI) in 1928 although both companies retained their separate identities and continued to compete for the same contracts. BTH developed manufactured electric torpedoes and electrical components for aircraft engines, munitions, etc., during the Second World War and in 1935 independently of each other, BTH and Metropolitan-Vickers were the first two companies in the world to construct jet engines.

Tasmanian Government Railways (TGR) was formed in 1872 after it began to take over failing privately owned railway lines with its headquarters in Launceton, Tasmania. TGR owned lines ranging from Deloraine, the North West Coast, Hobart and Launceton to Antill Ponds and Turnbridge. In 1978 TGR was amalgamated with the Commonwealth Railways, South Australian Railways to form the new Australian National Railways Commission, operating as Tasrail.

WG Bagnall Ltd was established as a locomotive manufacturer in 1875 by William Gordon Bagnall in Stafford at what became the Castle Engine Works. Bagnalls first locomotive was produced in 1876, the company going on to produce machines for collieries and overseas plantations. The majority of the products that were manufactured were small four and six-coupled steam locomotives for industrial use, the company were noted for building steam and diesel locomotives in standard and narrow gauges. In 1891 Ernest Edwin Baguley joined the company, he left in 1902 to start his own business. Bagnalls introduced several novel type of locomotive valve gear including the Bagnall-Price and the Baguley. They also used marine (circular) fireboxes on narrow gauge engines, a design that was cheap but needed a different firing technique. Some of the designs of Kerr, Stuart and Co were brought to Bagnalls when they employed William Sydney Edwards, the Chief Draughtsman of Kerr Stuart and Co. Examples of such locomotives can be seen on the Sittingbourne and Kemsley Light Railway. In addition to locomotives, Bagnalls constructed rolling stock and trackwork enabling the complete equipping of light railways. In 1933 Bagnalls entered into an agreement with Deutz of Germany to manufacture their locomotives under licence using engines imported from Germany. In 1948 WG Bagnall Ltd was sold to the Bridge and Steelwork Company, Heenan and Froude, whose owner also owned The Brush Electrical Engineering Co Ltd of Loughborough and in 1951, Bagnalls formed an association with Brush to create Brush-Bagnall Traction Ltd. This association only lasted two years. Heenan and Froude sold Bagnalls to W H Dorman & Co in 1959 in exchange for Dorman ‘A’ shares.

The Drewry Car Co Ltd was registered on 27 November 1906 in London located at Herne Hill Works and relocated to new works at Somerset Road, Teddington from 1907-1908. In 1911 a working agreement was made between Baguley-Cars Ltd (1911) with the Drewry Car Company Ltd. for the manufacture of internal combustion engine railcars. From 1930 a lot of Drewry locomotives were built by English Electric companies. In 1961 the company manufactured railway vehicles, specialising in diesel operated rail traction cars. In 1962 Drewry acquired a controlling interest in what had become E E Baguley Ltd, and formed Baguley-Drewry Ltd in 1987, once again building its own locomotives, in Burton-on-Trent.

In 1937 Robert Stephenson & Co. Ltd purchased the locomotive department of R & W Hawthorn Leslie & Co. Ltd. They became Robert Stephenson and Hawthorns Ltd. The policy was to concentrate the building of main line locomotives at Robert Stephenson’s Darlington works and industrial locomotives at Forth Banks. In 1944 Vulcan Foundry acquired Robert Stephenson and Hawthorns Ltd, ending Hawthorns' 137 year connection with Forth Banks. In 1955 Vulcan Foundry became full members of the English Electric group of companies, which became part of the GEC group of companies in 1968.

In 1910 the state-owned South African Railways and Harbours (SAR&H) organisation was created, after the four colonies of the Cape, Natal, Transvaal and the Orange Free State were amalgamated into the new Union of South Africa. In 1916, SAR&H took over the activities of the Central South African Railways, the Cape Government Railways and the Natal Government Railways. In 1924 the last privately owned railway line in South Africa was taken over by SAR&H; the New Cape Central Railway between Worcester and Voor Bay. In 1920 electrification of South Africa’s railways was completed, and in 1924 the first electric test train ran between Ladysmith and Chieveley in Natal. In 1950 the first portion of the new Johannesburg station was opened and construction was completed on the huge workshops complex at Koedoespoort. In 1960, diesel locomotives were introduced on a large scale to SAR&H. In 1981, SAR&H changed its name to South African Transport Services (SATS) and took on South Africa’s railway, harbour, road transport, and aviation and pipeline operations.

A site on the east side of Strand Road had been intermittently used for railway work since the 1840’s. In 1898 the Electric Railway and Tramway Carriage Works Ltd (ER&TCW) took over the site. This company had strong links with Dick Kerr & Co. The building of Preston Dock in the 1880’s had involved the diversion of the river Ribble and associates of Dick Kerr & Co built the factory building which still stands on the west side of Strand Road in 1900. This site occupies the space between the road and the original river bank. The two sites became a major centre of tram building and electrical equipment manufacture. Dick Kerr & Co took over the West works in 1903 and ER&TCW became the United Electric Car Company in 1905. A major early railway contract was for the electrification of the Liverpool Southport line of the Lancashire and Yorkshire Railway in 1904. The two factories continued in close association until they merged into English Electric in 1918. Military equipment and Seaplanes were built during the First World War and the Dick Kerr & Co Work’s Ladies became a famous football team at that time. Non railway electrical work was gradually transferred to other English Electric factories in the 1920’s. Besides continuing tramway business, major orders for Japan and France helped to establish electric traction industries in those countries, the Tarbes factory continues as a main unit in the Alstom group. A complete electrification scheme was supplied for the Arthur’s Pass line in New Zealand. 1930 saw the transfer of the traction electrical work to Phoenix, Bradford and the closure of West works until the late 30’s. East works continued making buses and trams including a large order for Blackpool. Early diesel electrics became a speciality and shunter contracts with the Willans built 6K engine for the LMS and others were very successful and formed the basis of large orders after the Second World War. In the late 30’s East works open yards and some surrounding properties were built over to form a large aircraft manufacturing site and with West works produced over 3000 Handley Page bombers during the war and just post war, DeHavilland ‘Vampire’ jet fighters. After the war most traction electrical equipment manufacture (but not the offices) was moved from Bradford to East works and ‘K’, ‘RK’ and ‘V’ engine manufacture moved from Willans, Rugby to the West works which also took on diesel and electric locomotive manufacture. Aircraft manufacture continued in both works with large orders for Canberra bombers and Lightning fighters. Final assembly was at Salmesbury and Warton aerodromes. Some locomotive manufacture was subcontracted to Vulcan from the late forties. Notable orders included large Electric locomotives for Spain and the ‘5E’ for South Africa. This locomotive was the basis of subsequent large orders for ‘5E1’ and ‘6E’ equipments produced by or in conjunction with AEI and GEC Traction. The prototype ‘Deltic’ was produced before the takeover of Vulcan and Robert Stephensons in 1955, when all locomotive production was quickly moved to those sites. Most of the diesel engines for the large number of locomotives supplied under the British Rail modernisation plan were made in West works. Aircraft production continued in both works until the formation of the British Aircraft Corporation in the mid-sixties. East works was transferred to BAC and diesel engines moved to Vulcan. The full range of traction equipment manufacture then took over West works and the offices moved in from Bradford in 1967. BAC closed East works in the early nineties and the factory was demolished. Four years after the merger with GEC in 1968 the former English Electric and AEI traction offices were reorganised with commercial and control gear at Trafford Park and machines at Preston. Production locations remained unaltered until the closure of Attercliffe, Sheffield in 1985. Semi-conductor technology gradually changed the product range in the 1980’s with GTO’s and IGBT’s enabling ac induction motors to take over from dc in the 90’s. Over 5000 EE507 dc motors were made for BR Southern region over a period of nearly 50 years. After the merger with Alsthom in 1989 the Trafford Park operation was gradually closed down and all offices and production were moved to Preston in the mid-nineties. Some buildings were demolished and others refurbished. Major orders for ac motor equipments included BR classes 465 and 365, ‘Eurostar’ motors and ‘common’ blocks, Korea, London Underground ‘Jubilee’ and ‘Northern’ lines and Virgin ’Pendolino’ and ‘Voyager’ trains. Most of the motors for these last two were made at Ornans, France after the closure of new motor manufacture in 1999. After 2003 only a small design and drawing facility remained, concentrating on repairs and modifications to existing rolling stock The site remains open as part of Alstom Transport’s Train Life Service business for the manufacture, repair and overhaul of traction control equipment and rotating machines, and as a spare parts distribution centre. BAE systems have occupied some offices on the site since 2006 as tenants of Alstom. Today, the factory is still operating on a reduced scale, only employing about 200.

Lister Blackstone was formed through the acquisition of Black-stone & Co by R A Lister & Co (1867), in Stamford who was an agricultural implement manufacturer in 1936. Following the takeover a period of reorganisation of the factory and the production methods occurred as Lister had originally acquired Blackstone in order to gain access to the large engine market. During the Second World War, all production of open crank spring injection engines, small vertical petrol, kerosene and diesel engines and BPV automotive engines were stopped. In particular, the production of EPV engines for base load installations was increased to meet the demand from all three Services and the demand increased for productivity on agricultural implements. Lister Blackstone was run as an independent family business until 1st June 1965 when it was taken over by the Hawker Siddeley Group and merged with Mirrlees National of Stockport four years later. The company name changed to Mirrlees Blackstone Ltd in 1969.