The Vulcan Foundry was originally opened in 1830 at Newton-le-Willows, as Charles Tayleur and Company. It initially produced girders for bridges, switches and crossings, and other ironwork following the opening of the Liverpool and Manchester Railway. Robert Stephenson became a partner in 1832, and in the same year, the first locomotives ‘Tayleur’ and ‘Stephenson’ were delivered to the North Union Railway. By 1840 locomotives had been delivered to five European countries and to North America. The company became The Vulcan Foundry Company in 1847 and acquired limited liability in 1864. From the beginning of 1898, the name changed again to The Vulcan Foundry Limited, dropping the word 'company.' Vulcan locomotives were exported all over the world, with the first locomotives for Russia and Japan supplied in 1837 and 1871 respectively and a long association with India began in 1852. First World War production included shells, gun mountings and mine sweeping equipment. The first non-steam locomotive, an electric, was produced for India in 1929. The first diesel locomotive design commenced in 1932/33 and an agreement was reached with A/S Frichs in Denmark. The English Electric 6K engine was used from this time. The “Waltzing Matilda” tank was developed in 1938 and produced in large numbers and over five hundred ‘Austerity’ steam locomotives were produced for the War Department. Other wartime production included gun mountings and torpedo parts. In 1944 Vulcan acquired the locomotive business, Robert Stephenson & Hawthorns Ltd, based in Newcastle-upon-Tyne. In 1946 the company began working with the English Electric Company producing diesel and electric locomotives and became part of the English Electric Group in 1955. All locomotive building from Preston was transferred to Vulcan Foundry and Robert Stephenson’s in Darlington. Under the new ownership, the works produced many locomotives for both domestic and foreign railways, notably the Deltic. The mid-sixties saw the ‘RK’/’V’ engine production at Preston moved to Vulcan and Ruston & Hornsby Ltd merged with English Electric Diesels in 1966. After the General Electric Company plc (GEC) takeover in 1968 the Ruston name was used for some time inside what became GEC Diesels Ltd in 1975. Engine production and development continued for locomotive, industrial and marine applications until after the GEC-Alsthom merger in 1989. The company took over Mirlees Engines, Stockport in 1997 and was renamed Alstom Engines Ltd.

In 1937 Robert Stephenson & Co. Ltd purchased the locomotive department of R & W Hawthorn Leslie & Co. Ltd. They became Robert Stephenson and Hawthorns Ltd. The policy was to concentrate the building of main line locomotives at Robert Stephenson’s Darlington works and industrial locomotives at Forth Banks. In 1944 Vulcan Foundry acquired Robert Stephenson and Hawthorns Ltd, ending Hawthorns' 137 year connection with Forth Banks. In 1955 Vulcan Foundry became full members of the English Electric group of companies, which became part of the GEC group of companies in 1968.

A site on the east side of Strand Road had been intermittently used for railway work since the 1840’s. In 1898 the Electric Railway and Tramway Carriage Works Ltd (ER&TCW) took over the site. This company had strong links with Dick Kerr & Co. The building of Preston Dock in the 1880’s had involved the diversion of the river Ribble and associates of Dick Kerr & Co built the factory building which still stands on the west side of Strand Road in 1900. This site occupies the space between the road and the original river bank. The two sites became a major centre of tram building and electrical equipment manufacture. Dick Kerr & Co took over the West works in 1903 and ER&TCW became the United Electric Car Company in 1905. A major early railway contract was for the electrification of the Liverpool Southport line of the Lancashire and Yorkshire Railway in 1904. The two factories continued in close association until they merged into English Electric in 1918. Military equipment and Seaplanes were built during the First World War and the Dick Kerr & Co Work’s Ladies became a famous football team at that time. Non railway electrical work was gradually transferred to other English Electric factories in the 1920’s. Besides continuing tramway business, major orders for Japan and France helped to establish electric traction industries in those countries, the Tarbes factory continues as a main unit in the Alstom group. A complete electrification scheme was supplied for the Arthur’s Pass line in New Zealand. 1930 saw the transfer of the traction electrical work to Phoenix, Bradford and the closure of West works until the late 30’s. East works continued making buses and trams including a large order for Blackpool. Early diesel electrics became a speciality and shunter contracts with the Willans built 6K engine for the LMS and others were very successful and formed the basis of large orders after the Second World War. In the late 30’s East works open yards and some surrounding properties were built over to form a large aircraft manufacturing site and with West works produced over 3000 Handley Page bombers during the war and just post war, DeHavilland ‘Vampire’ jet fighters. After the war most traction electrical equipment manufacture (but not the offices) was moved from Bradford to East works and ‘K’, ‘RK’ and ‘V’ engine manufacture moved from Willans, Rugby to the West works which also took on diesel and electric locomotive manufacture. Aircraft manufacture continued in both works with large orders for Canberra bombers and Lightning fighters. Final assembly was at Salmesbury and Warton aerodromes. Some locomotive manufacture was subcontracted to Vulcan from the late forties. Notable orders included large Electric locomotives for Spain and the ‘5E’ for South Africa. This locomotive was the basis of subsequent large orders for ‘5E1’ and ‘6E’ equipments produced by or in conjunction with AEI and GEC Traction. The prototype ‘Deltic’ was produced before the takeover of Vulcan and Robert Stephensons in 1955, when all locomotive production was quickly moved to those sites. Most of the diesel engines for the large number of locomotives supplied under the British Rail modernisation plan were made in West works. Aircraft production continued in both works until the formation of the British Aircraft Corporation in the mid-sixties. East works was transferred to BAC and diesel engines moved to Vulcan. The full range of traction equipment manufacture then took over West works and the offices moved in from Bradford in 1967. BAC closed East works in the early nineties and the factory was demolished. Four years after the merger with GEC in 1968 the former English Electric and AEI traction offices were reorganised with commercial and control gear at Trafford Park and machines at Preston. Production locations remained unaltered until the closure of Attercliffe, Sheffield in 1985. Semi-conductor technology gradually changed the product range in the 1980’s with GTO’s and IGBT’s enabling ac induction motors to take over from dc in the 90’s. Over 5000 EE507 dc motors were made for BR Southern region over a period of nearly 50 years. After the merger with Alsthom in 1989 the Trafford Park operation was gradually closed down and all offices and production were moved to Preston in the mid-nineties. Some buildings were demolished and others refurbished. Major orders for ac motor equipments included BR classes 465 and 365, ‘Eurostar’ motors and ‘common’ blocks, Korea, London Underground ‘Jubilee’ and ‘Northern’ lines and Virgin ’Pendolino’ and ‘Voyager’ trains. Most of the motors for these last two were made at Ornans, France after the closure of new motor manufacture in 1999. After 2003 only a small design and drawing facility remained, concentrating on repairs and modifications to existing rolling stock The site remains open as part of Alstom Transport’s Train Life Service business for the manufacture, repair and overhaul of traction control equipment and rotating machines, and as a spare parts distribution centre. BAE systems have occupied some offices on the site since 2006 as tenants of Alstom. Today, the factory is still operating on a reduced scale, only employing about 200.

The Coal Industry Nationalisation Act 1946 provided for the complete nationalisation of the coal industry and on 12 July 1946 established the National Coal Board (NCB). This body, appointed on 15 July 1946, was made solely responsible for managing the industry and running it on business lines, except that the Minister of Fuel and Power, after consulting with the board, might give it directions of a general character. The minister appointed the members of the board, numbering nine in 1946, raised to a maximum of eleven of which eight should be full-time in 1949 and to a maximum of fourteen in 1973, and he presented the NCB's reports to Parliament. In October 1969 these general powers passed to the Ministry of Technology, in October 1970 to the Department of Trade and Industry, and in January 1974 to the Department of Energy. The eight departments of the National Coal Board headquarters - Production, Marketing, Finance, Labour Relations, Manpower and Welfare, Scientific, Legal and Secretary's - made up the National Board and formed the top tier of a four tier system. At the lowest level were the coalfields (each colliery had its own manager) which were divided into 48 geographical areas under the control of an area manager. The areas were grouped into 8 geographical divisions under a divisional board which reported to the National Board. On the vesting date, 1 January 1947, the productive assets of the 800 or more private colliery undertakings and the service contracts of their employees were transferred to the National Coal Board, as were the coal deposits and other assets of the Coal Commission and the functions and staff of the district selling schemes. Subsequently the board acquired other responsibilities, notably that for the coal survey from the Department of Scientific and Industrial Research in August 1947, and that for miners' hostels from the Ministry of Labour and National Service in the same year. In 1951 it took over some of the functions of the Miners' Welfare Commission, and in April 1952 it acquired responsibility for opencast coal mining from the Ministry of Fuel and Power. In 1973 it formed two holding companies, NCB (Coal Products) Ltd. and NCB (Ancillaries) Ltd. to handle two major aspects of its work not directly related to deep and opencast mining. The Coal Industry Act 1977 gave the board new powers in respect of the acquisition, treatment and sale of petroleum and of working minerals other than coal or petroleum which were discovered in the course of prospecting for or working coal and petroleum. The NCB was headed by a chairman and deputy chairman; each of the other members took charge of an executive department or research establishment. The main functions of the board as a whole were to decide and set objectives for the industry, to lay down policy directives and the limits within which management must work, to hold management to account and to provide for the future by means of research and development, and the recruitment and training of staff. It was also responsible for promoting the safety, health and welfare of employees. Many of these functions were exercised at the area and colliery level, a chain of command which replaced the previous five-tier system in 1967. The board itself continued to settle national policy, conduct national negotiations, obtain capital and provide common services such as scientific research. Before 1967 the divisional boards also exercised wide discretion in the forming of policy and applying it at area and colliery level. The headquarters departments advised the board on general policy and objectives, provided information and executed policy, and they also operated certain national services, including central workshops and the rescue service; and regional services in non-coalfield areas. On 1 January 1987, the NCB became the British Coal Corporation, which was wound up in 1997.

Metropolitan-Vickers Electrical Co Ltd was the new trading name given to British Westinghouse Electric and Manufacturing Co on 8 September 1919. The predecessor company had sold its controlling share to the Metropolitan Carriage Wagon Co in 1916 in order to gain membership of the Federation of British Industries. In 1919, Vickers acquired the Metropolitan Carriage Wagon Co, along with its controlling share in British Westinghouse, prompting the change in name to Metropolitan-Vickers Electrical Co Ltd. The American owned British Westinghouse had established its English operations at Trafford Park in 1899, and Metropolitan-Vickers Electrical Co Ltd continued on the same site from 8 September 1919. The company was initially known for its electricity generators, later diversifying into the manufacture of steam turbines, switchgear, transformers, electronics and railway traction equipment. The passing of the Electricity (Supply) Act in 1926 provided a boost to the company’s post-war fortunes, with the creation of the National Grid generating demand for the company's products. In 1928, Metropolitan-Vickers Electrical Co Ltd merged with its rival British Thomson Houston Co Ltd, retaining both names for trading purposes. The following year, on 4 January 1929, Associated Electrical Industries Ltd (AEI) acquired Metropolitan-Vickers Electrical Co Ltd and the British Thomson Houston Co Ltd. Again, both trading names were retained, and a fierce rivalry was established between the firms which the parent company was unable to control. In 1931, Sir Felix Pole joined Metropolitan-Vickers Electrical Co Ltd as its new chairman. He oversaw a period of expansion for the company leading into the Second World War. In 1939, seeking a more concise name for the company, the Board of Directors decided upon Metrovicks, which became interchangeable with the official company name of Metropolitan-Vickers Electrical Co Ltd. Under Sir Felix Pole's chairmanship, Metropolitan-Vickers developed new products for the aviation industry and during the war was one of the sites where Lancaster bombers were built. In 1941, the company developed the first British axial-flow jet engine, the Metrovick F.2. Following the Second World War, the company appointed Oliver Lyttelton as chairman, with the aim of increasing the efficiency and productivity of AEI. Despite his success in achieving this aim, Lyttelton was unable to resolve the commercial rivalry between Metropolitan-Vickers Electrical Co Ltd and the British Thomson Houston Co Ltd. During his second period as chairman, from 1954-1963, Lyttelton, now Lord Chandos, oversaw the development by Metropolitan-Vickers Electrical Co Ltd of the first commercial transistor computer, the Metrovick 950. Chandos also resolved to extinguish the competition and internal divisions between Metropolitan-Vickers Electrical Co Ltd and the British Thomson Houston Co Ltd, and both company names ceased to be used from 1 January 1960, with all subsidiaries going on to trade under the name of Associated Electrical Industries Ltd.