In 1900 the British Westinghouse Electrical & Manufacturing Co Ltd bought land in Trafford Park and built a factory which went into production in 1902 for the manufacture of mechanical and electrical equipment for the generation, transmission and use of electricity. In 1919, Trafford Park Works became owned by British Westinghouse’s successor, Metropolitan-Vickers Electrical Company (MV). The main shops, in common with factory construction throughout Trafford Park, were single floor type, with bays 1,000 feet in length, and had direct railway communication with the docks and trunk systems of the country. The main office block was a copy of the Westinghouse building in Pittsburgh, USA and the factory was to the American design and used imported steelwork for construction. Products manufactured at the Works included gas engines, stationary steam engines, electric generators, transformers, switchgear, meters, motors, control gear, and arc lamps. During the First World War, British Westinghouse built some small petrol-electric locomotives for the War Department Light Railways. In 1928 the Works were taken over by Associated Electrical Industries (AEI), which merged Metropolitan-Vickers and British Thomson-Houston, though these two companies continued their own trading names. Traction design and manufacture was always a minority of the workload at Trafford Park with the largest operations generally turbine manufacture. Very few vehicles were built there, and traction machines (i.e. motors, inductors and generators) were largely built in other places – notably at Sheffield or Rugby. Trafford Park traction manufacture was largely that of assembling control gear – contactors, switches, drivers’ controllers, camshaft controllers, relays etc. and building these into frames or equipment boxes for installation in vehicles made elsewhere. An important part of the Trafford Park Works site was the general switchgear operation, mainly for generation or distribution installations. The on-site Switchgear Testing Company was a “testing house” for these products and contributed to testing and development of traction circuit breakers and switchgear. During the Second World War MV acting for the Ministry of Aircraft Production produced more than a thousand Lancaster Bombers in the adjacent Mosley Road building. The company also manufactured war munitions and in the laboratories developed what became known as Radar. In 1959 the newly formed AEI Traction Division established its headquarters at Trafford Park, with a product range that included electric and diesel-electric locomotives; electrical equipment for tram-cars, trolley buses and trolley mining locomotives and traction motors. AEI was taken over by the General Electric Company (GEC) in 1967 whose Witton Works closed in 1969, with the design office and traction manufacture transferred to Trafford Park, as a result of the GEC reorganisation and mergers. GEC Traction Ltd took over the Works in 1972. In 1990 the former Low Voltage Switchgear site at Trafford Park (West Works) was renovated to be the new manufacturing facility for GEC Alsthom Traction, with an electronics workshop, machine shop and plating baths, and an assembly shop for switchgear, equipment cases and power modules. This building was vacated in 1998 when power modules and switchgear was moved to Tarbes in south west France. The Works housed the administrative, commercial and accounting functions, the majority of the design departments and the development section with its associated workshops and laboratories. The manufacturing area was devoted primarily to the production of components of traction control and railway signalling equipment. In 1993, as part of the rationalisation of the equipment group, it was announced that the headquarters of GEC Alsthom Traction would move to Preston, leaving only Power Module design and manufacture at Manchester, with the eventual closing of all activities at Trafford Park in 1998. The iconic original Westinghouse building was demolished and the site is now (2015) largely devoted to container handling and logistics operations.

Associated Electrical Industries (AEI) was formed in 1928 as a financial holding company for a number of leading electrical manufacturing and trading companies in the United Kingdom. The two major constituent companies were British Thomson-Houston (BTH) based at Rugby, (Mill Road Works) and Metropolitan-Vickers Electrical Company Ltd (Metrovicks) situated at Trafford Park, Manchester. However, fierce rivalry existed between the Metrovick and BTH brands resulting in internal competition and duplicated management. This was highlighted during the Second World War in 1939, when Metrovicks and BTH became the first two firms in the world to construct jet engines (independently from each other). Following the Second World War, in 1954, AEI expanded to consist of BTH, Metrovicks, Edison Swan Electric Co, Ferguson Pailin, Hotpoint Electric Appliance Co, International Refrigerator Co, Newton Victor, Sunvic Controls, Premier Electric Heaters, Siemens Bros (1955) and Birlec (1954). In 1959 AEI decided to remove the familiar brands of BTH and Metrovicks and consolidate both as AEI resulting in internal problems and a fall in sales and market value. However, AEI acquired a variety of companies from 1959 to 1967, these included Associated Insulation Products, W. T. Henley’s Telegraph Works Co (1958), and London Electric Wire Co and Smiths (1958), Submarine Cables, Hackbridge Holdings Ltd., The Lancashire Dynamo and Crypto Ltd., W.T. Avery Ltd., Henley and Schreiber. The General Electric Company bought AEI in 1967.

GEC Traction (GECT) was formed in 1972 as part of the GEC Power Engineering Group following earlier amalgamations of the traction divisions of the General Electric Company (GEC), the English Electric Company (EE) and Associated Electrical Industries (AEI). A wholly owned subsidiary company of GEC, the company had offices and works, located at Trafford Park in Manchester, at Strand Road in Preston, and at Attercliffe Common, Sheffield. The headquarters of GEC Traction was Trafford Park, Manchester (previously the headquarters of English Electric-AEI Traction) with design of rotating machines at Preston and Sheffield, and manufacturing activities for control equipment at Manchester and Preston. GEC Traction designed and manufactured a full range of traction machines and control equipment for electric vehicles, including electric locomotives and multiple unit trains for main-line and mass-transit railway systems (dc up to 3,000 volts, and ac up to 50,000 volts), diesel-electric locomotives and trains, mining and industrial locomotives, tramcars and trolleybuses. GEC Traction was the leading supplier of traction equipment in the UK and had a wide market around the world, particularly in South Africa, Australasia, Hong Kong, South Korea, South America and Pakistan. In 1979 the Industrial Locomotive Division of the former English Electric which was based at Vulcan Works, Newton-le-Willows was merged into GEC Traction, which later became a separate company, GEC Industrial Locomotives Ltd. During the late 1980s and 1990s the firm underwent major rationalisation, involving closure of several sites including Attercliffe Common in Sheffield in 1985 and the company’s headquarters at Trafford Park in Manchester in 1998. The company name GEC Traction endured until a merger with the French Alsthom group in 1989, which created GEC Alsthom Traction, which was still a branch of the main company GEC Alsthom.