In 1900 the British Westinghouse Electrical & Manufacturing Co Ltd bought land in Trafford Park and built a factory which went into production in 1902 for the manufacture of mechanical and electrical equipment for the generation, transmission and use of electricity. In 1919, Trafford Park Works became owned by British Westinghouse’s successor, Metropolitan-Vickers Electrical Company (MV). The main shops, in common with factory construction throughout Trafford Park, were single floor type, with bays 1,000 feet in length, and had direct railway communication with the docks and trunk systems of the country. The main office block was a copy of the Westinghouse building in Pittsburgh, USA and the factory was to the American design and used imported steelwork for construction. Products manufactured at the Works included gas engines, stationary steam engines, electric generators, transformers, switchgear, meters, motors, control gear, and arc lamps. During the First World War, British Westinghouse built some small petrol-electric locomotives for the War Department Light Railways. In 1928 the Works were taken over by Associated Electrical Industries (AEI), which merged Metropolitan-Vickers and British Thomson-Houston, though these two companies continued their own trading names. Traction design and manufacture was always a minority of the workload at Trafford Park with the largest operations generally turbine manufacture. Very few vehicles were built there, and traction machines (i.e. motors, inductors and generators) were largely built in other places – notably at Sheffield or Rugby. Trafford Park traction manufacture was largely that of assembling control gear – contactors, switches, drivers’ controllers, camshaft controllers, relays etc. and building these into frames or equipment boxes for installation in vehicles made elsewhere. An important part of the Trafford Park Works site was the general switchgear operation, mainly for generation or distribution installations. The on-site Switchgear Testing Company was a “testing house” for these products and contributed to testing and development of traction circuit breakers and switchgear. During the Second World War MV acting for the Ministry of Aircraft Production produced more than a thousand Lancaster Bombers in the adjacent Mosley Road building. The company also manufactured war munitions and in the laboratories developed what became known as Radar. In 1959 the newly formed AEI Traction Division established its headquarters at Trafford Park, with a product range that included electric and diesel-electric locomotives; electrical equipment for tram-cars, trolley buses and trolley mining locomotives and traction motors. AEI was taken over by the General Electric Company (GEC) in 1967 whose Witton Works closed in 1969, with the design office and traction manufacture transferred to Trafford Park, as a result of the GEC reorganisation and mergers. GEC Traction Ltd took over the Works in 1972. In 1990 the former Low Voltage Switchgear site at Trafford Park (West Works) was renovated to be the new manufacturing facility for GEC Alsthom Traction, with an electronics workshop, machine shop and plating baths, and an assembly shop for switchgear, equipment cases and power modules. This building was vacated in 1998 when power modules and switchgear was moved to Tarbes in south west France. The Works housed the administrative, commercial and accounting functions, the majority of the design departments and the development section with its associated workshops and laboratories. The manufacturing area was devoted primarily to the production of components of traction control and railway signalling equipment. In 1993, as part of the rationalisation of the equipment group, it was announced that the headquarters of GEC Alsthom Traction would move to Preston, leaving only Power Module design and manufacture at Manchester, with the eventual closing of all activities at Trafford Park in 1998. The iconic original Westinghouse building was demolished and the site is now (2015) largely devoted to container handling and logistics operations.

In 1910 the state-owned South African Railways and Harbours (SAR&H) organisation was created, after the four colonies of the Cape, Natal, Transvaal and the Orange Free State were amalgamated into the new Union of South Africa. In 1916, SAR&H took over the activities of the Central South African Railways, the Cape Government Railways and the Natal Government Railways. In 1924 the last privately owned railway line in South Africa was taken over by SAR&H; the New Cape Central Railway between Worcester and Voor Bay. In 1920 electrification of South Africa’s railways was completed, and in 1924 the first electric test train ran between Ladysmith and Chieveley in Natal. In 1950 the first portion of the new Johannesburg station was opened and construction was completed on the huge workshops complex at Koedoespoort. In 1960, diesel locomotives were introduced on a large scale to SAR&H. In 1981, SAR&H changed its name to South African Transport Services (SATS) and took on South Africa’s railway, harbour, road transport, and aviation and pipeline operations.

In 1948 the Kenya Uganda Railways & Harbours and the Tanganyika Railways & Port Services were merged and became the East African Railways & Harbours Corporation. In 1956 the EAR&H extended the Uganda Railway from Kampala to Kasese and to Arua in 1964. In 1977 the East African Community dissolved and EAR&H split into three national railways; the Uganda Railways Corporation, Tanzania Railways Corporation and Kenya Railways Corporation.

On 1st February 1961, Eastern Bengal Railway was renamed as the Pakistan Eastern Railway. Then in 1962, the control of Pakistan Eastern Railway was transferred from the Central Government to the Government of East Pakistan and placed under the management of a Railway Board. With the emergence of Bangladesh as an independent nation in 1971, it became the Bangladesh Railway.

In 1947, a major portion of the North Western Railways 8,122 kilometer route (5,048 mi) was transferred to Pakistan and named the Pakistan Western Railway. The remaining 3,133 route kilometers (1,947 mi) were transferred to Indian control. In May 1974 it was renamed Pakistan Railways.

On 9th February 1855, the Imperial Government of Brazil signed a contract with Edward Price for the construction of the first section of a railway. Work commenced on the Central Railway of Brazil on 11th June 1855, and on 29th March 1858, the 48km section from Rio de Janeiro to Freguesia de Nossa Senhora da Conceicao de Marapicu was completed. On March 16, 1957 the company came under the control of Rede Ferroviária Federal S.A. (RFFSA).