GEC Traction (GECT) was formed in 1972 as part of the GEC Power Engineering Group following earlier amalgamations of the traction divisions of the General Electric Company (GEC), the English Electric Company (EE) and Associated Electrical Industries (AEI). A wholly owned subsidiary company of GEC, the company had offices and works, located at Trafford Park in Manchester, at Strand Road in Preston, and at Attercliffe Common, Sheffield. The headquarters of GEC Traction was Trafford Park, Manchester (previously the headquarters of English Electric-AEI Traction) with design of rotating machines at Preston and Sheffield, and manufacturing activities for control equipment at Manchester and Preston. GEC Traction designed and manufactured a full range of traction machines and control equipment for electric vehicles, including electric locomotives and multiple unit trains for main-line and mass-transit railway systems (dc up to 3,000 volts, and ac up to 50,000 volts), diesel-electric locomotives and trains, mining and industrial locomotives, tramcars and trolleybuses. GEC Traction was the leading supplier of traction equipment in the UK and had a wide market around the world, particularly in South Africa, Australasia, Hong Kong, South Korea, South America and Pakistan. In 1979 the Industrial Locomotive Division of the former English Electric which was based at Vulcan Works, Newton-le-Willows was merged into GEC Traction, which later became a separate company, GEC Industrial Locomotives Ltd. During the late 1980s and 1990s the firm underwent major rationalisation, involving closure of several sites including Attercliffe Common in Sheffield in 1985 and the company’s headquarters at Trafford Park in Manchester in 1998. The company name GEC Traction endured until a merger with the French Alsthom group in 1989, which created GEC Alsthom Traction, which was still a branch of the main company GEC Alsthom.

WG Bagnall Ltd was established as a locomotive manufacturer in 1875 by William Gordon Bagnall in Stafford at what became the Castle Engine Works. Bagnalls first locomotive was produced in 1876, the company going on to produce machines for collieries and overseas plantations. The majority of the products that were manufactured were small four and six-coupled steam locomotives for industrial use, the company were noted for building steam and diesel locomotives in standard and narrow gauges. In 1891 Ernest Edwin Baguley joined the company, he left in 1902 to start his own business. Bagnalls introduced several novel type of locomotive valve gear including the Bagnall-Price and the Baguley. They also used marine (circular) fireboxes on narrow gauge engines, a design that was cheap but needed a different firing technique. Some of the designs of Kerr, Stuart and Co were brought to Bagnalls when they employed William Sydney Edwards, the Chief Draughtsman of Kerr Stuart and Co. Examples of such locomotives can be seen on the Sittingbourne and Kemsley Light Railway. In addition to locomotives, Bagnalls constructed rolling stock and trackwork enabling the complete equipping of light railways. In 1933 Bagnalls entered into an agreement with Deutz of Germany to manufacture their locomotives under licence using engines imported from Germany. In 1948 WG Bagnall Ltd was sold to the Bridge and Steelwork Company, Heenan and Froude, whose owner also owned The Brush Electrical Engineering Co Ltd of Loughborough and in 1951, Bagnalls formed an association with Brush to create Brush-Bagnall Traction Ltd. This association only lasted two years. Heenan and Froude sold Bagnalls to W H Dorman & Co in 1959 in exchange for Dorman ‘A’ shares.

The English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.

The North British Locomotive Co Ltd was formed by the merger the 'big three' Glasgow locomotive builders (Sharp Stewart & Co, Neilson, Reid & Co and Dubs & Co) in 1903 as a result of increased competition both at home and from abroad. The new company claimed to be the largest manufacturers of locomotives anywhere outside America and was prompted by the ever increasing annual production by the Baldwin Locomotive Company in Philadelphia, USA, which had recently made incursions into the domestic UK market and in India, which the British locomotive industry had considered to be its own special preserve. It was believed that the rivalries and competition between the three companies operating individually within Glasgow had already produced significant technological advances which, in the new North British Locomotive Company would combine to make a single powerful and well equipped company, ready to dominate the market and take on competition, particularly from America. The new company never managed to operate at its capacity of 700 locomotives per year, producing a maximum of 573 in 1905. These numbers were maintained through to 1909 when production numbers began to fall rapidly. During the First World War North British Locomotive Company made locomotives for the War Department, as well as munitions and other military equipment, which were produced in vast quantities to meet the high demand. However, between the two World Wars, while orders were still being received, particularly from domestic railway companies, the fluctuation of demand meant that the company ran into some difficulty. As a result, employee numbers were significantly reduced, and manufacturing was concentrated at Queens Park and Hyde Park works. The last locomotive orders were completed at the Atlas Works in 1923. The Great Depression from 1929 saw the decline in demand for locomotives worldwide, with none built at all in 1932, and by the end of the 1930s, locomotive production at the North British Locomotive Company was operating at a loss. At the outbreak of the Second World War the company concentrated once more on war work, supplying both locomotives for the Ministry of Supply and munitions for the war effort. After World War II there was something of a revival in locomotive manufacturing, with orders being received and agreements being reached to build diesel & electric locomotives with the General Electric Company. This upturn in fortune was not to last however, as the North British Locomotive Company failed to make the successful transition from steam to diesel locomotive production. In 1957, the last order for steam locomotives was placed with the company and the last steam locomotive was completed in 1958. Although the company were making small industrial diesel locomotives, and received some early main line diesel orders from British Railways, the orders were never big enough to maintain the company. Other locomotive manufacturers, who had acted swiftly in transferring from steam to diesel and electric production, were becoming more successful. The company went into liquidation on 19 April 1962 with Messers Andrew Barclay Sons & Co (Kilmarnock, Ayrshire, Scotland) acquiring the North British Locomotive Company's goodwill.