The English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.

In 1959 Associated Electrical Industries (AEI) created a self-contained company named AEI Traction Division to control the railway activities of both Metropolitan Vickers Electrical Company Ltd and British Thomson-Houston (BTH). Included in this company were the interests of the Metropolitan-Vickers General Railway Signal Co., (later to become GEC General Railway Signal). The newly formed company established its headquarters, at Trafford Park, Manchester, and operated from three other sites, Attercliffe Common in Sheffield, Rugby Works, and Stockton Works supplying traction motors, machines, control gear and mechanical parts of locomotives. AEI Traction Limited’s product range encompassed electric and diesel-electric locomotives; electrical equipment for tramcars, trolley buses, trolley mining locomotives, traction motors and gears. In 1969 AEI Traction Division merged with English Electric Traction to form English Electric-AEI Traction Division.

Associated Electrical Industries (AEI) was formed in 1928 as a financial holding company for a number of leading electrical manufacturing and trading companies in the United Kingdom. The two major constituent companies were British Thomson-Houston (BTH) based at Rugby, (Mill Road Works) and Metropolitan-Vickers Electrical Company Ltd (Metrovicks) situated at Trafford Park, Manchester. However, fierce rivalry existed between the Metrovick and BTH brands resulting in internal competition and duplicated management. This was highlighted during the Second World War in 1939, when Metrovicks and BTH became the first two firms in the world to construct jet engines (independently from each other). Following the Second World War, in 1954, AEI expanded to consist of BTH, Metrovicks, Edison Swan Electric Co, Ferguson Pailin, Hotpoint Electric Appliance Co, International Refrigerator Co, Newton Victor, Sunvic Controls, Premier Electric Heaters, Siemens Bros (1955) and Birlec (1954). In 1959 AEI decided to remove the familiar brands of BTH and Metrovicks and consolidate both as AEI resulting in internal problems and a fall in sales and market value. However, AEI acquired a variety of companies from 1959 to 1967, these included Associated Insulation Products, W. T. Henley’s Telegraph Works Co (1958), and London Electric Wire Co and Smiths (1958), Submarine Cables, Hackbridge Holdings Ltd., The Lancashire Dynamo and Crypto Ltd., W.T. Avery Ltd., Henley and Schreiber. The General Electric Company bought AEI in 1967.

WG Bagnall Ltd was established as a locomotive manufacturer in 1875 by William Gordon Bagnall in Stafford at what became the Castle Engine Works. Bagnalls first locomotive was produced in 1876, the company going on to produce machines for collieries and overseas plantations. The majority of the products that were manufactured were small four and six-coupled steam locomotives for industrial use, the company were noted for building steam and diesel locomotives in standard and narrow gauges. In 1891 Ernest Edwin Baguley joined the company, he left in 1902 to start his own business. Bagnalls introduced several novel type of locomotive valve gear including the Bagnall-Price and the Baguley. They also used marine (circular) fireboxes on narrow gauge engines, a design that was cheap but needed a different firing technique. Some of the designs of Kerr, Stuart and Co were brought to Bagnalls when they employed William Sydney Edwards, the Chief Draughtsman of Kerr Stuart and Co. Examples of such locomotives can be seen on the Sittingbourne and Kemsley Light Railway. In addition to locomotives, Bagnalls constructed rolling stock and trackwork enabling the complete equipping of light railways. In 1933 Bagnalls entered into an agreement with Deutz of Germany to manufacture their locomotives under licence using engines imported from Germany. In 1948 WG Bagnall Ltd was sold to the Bridge and Steelwork Company, Heenan and Froude, whose owner also owned The Brush Electrical Engineering Co Ltd of Loughborough and in 1951, Bagnalls formed an association with Brush to create Brush-Bagnall Traction Ltd. This association only lasted two years. Heenan and Froude sold Bagnalls to W H Dorman & Co in 1959 in exchange for Dorman ‘A’ shares.