Union Carriage & Wagon (UCW) are a rolling stock company based in Nigel, South Africa and were founded in 1957. Their workshops are based in nearby Johannesburg. In 1964, Union Carriage & Wagon supplied locomotives to South African Railways. In 2013, Commuter Transport Engineering acquired UCW, however the name did not change.

The English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.

In 1900 the British Westinghouse Electrical & Manufacturing Co Ltd bought land in Trafford Park and built a factory which went into production in 1902 for the manufacture of mechanical and electrical equipment for the generation, transmission and use of electricity. In 1919, Trafford Park Works became owned by British Westinghouse’s successor, Metropolitan-Vickers Electrical Company (MV). The main shops, in common with factory construction throughout Trafford Park, were single floor type, with bays 1,000 feet in length, and had direct railway communication with the docks and trunk systems of the country. The main office block was a copy of the Westinghouse building in Pittsburgh, USA and the factory was to the American design and used imported steelwork for construction. Products manufactured at the Works included gas engines, stationary steam engines, electric generators, transformers, switchgear, meters, motors, control gear, and arc lamps. During the First World War, British Westinghouse built some small petrol-electric locomotives for the War Department Light Railways. In 1928 the Works were taken over by Associated Electrical Industries (AEI), which merged Metropolitan-Vickers and British Thomson-Houston, though these two companies continued their own trading names. Traction design and manufacture was always a minority of the workload at Trafford Park with the largest operations generally turbine manufacture. Very few vehicles were built there, and traction machines (i.e. motors, inductors and generators) were largely built in other places – notably at Sheffield or Rugby. Trafford Park traction manufacture was largely that of assembling control gear – contactors, switches, drivers’ controllers, camshaft controllers, relays etc. and building these into frames or equipment boxes for installation in vehicles made elsewhere. An important part of the Trafford Park Works site was the general switchgear operation, mainly for generation or distribution installations. The on-site Switchgear Testing Company was a “testing house” for these products and contributed to testing and development of traction circuit breakers and switchgear. During the Second World War MV acting for the Ministry of Aircraft Production produced more than a thousand Lancaster Bombers in the adjacent Mosley Road building. The company also manufactured war munitions and in the laboratories developed what became known as Radar. In 1959 the newly formed AEI Traction Division established its headquarters at Trafford Park, with a product range that included electric and diesel-electric locomotives; electrical equipment for tram-cars, trolley buses and trolley mining locomotives and traction motors. AEI was taken over by the General Electric Company (GEC) in 1967 whose Witton Works closed in 1969, with the design office and traction manufacture transferred to Trafford Park, as a result of the GEC reorganisation and mergers. GEC Traction Ltd took over the Works in 1972. In 1990 the former Low Voltage Switchgear site at Trafford Park (West Works) was renovated to be the new manufacturing facility for GEC Alsthom Traction, with an electronics workshop, machine shop and plating baths, and an assembly shop for switchgear, equipment cases and power modules. This building was vacated in 1998 when power modules and switchgear was moved to Tarbes in south west France. The Works housed the administrative, commercial and accounting functions, the majority of the design departments and the development section with its associated workshops and laboratories. The manufacturing area was devoted primarily to the production of components of traction control and railway signalling equipment. In 1993, as part of the rationalisation of the equipment group, it was announced that the headquarters of GEC Alsthom Traction would move to Preston, leaving only Power Module design and manufacture at Manchester, with the eventual closing of all activities at Trafford Park in 1998. The iconic original Westinghouse building was demolished and the site is now (2015) largely devoted to container handling and logistics operations.

Railways in Britain were nationalised under the terms of the Transport Act 1947 which came into effect on 1 January 1948. The Act created the British Transport Commission and the Railway Executive. The Act vested the business and assets of the then existing railway companies in the British Transport Commission. The Railway Executive, a corporate body subordinate to the British Transport Commission, was created to manage and operate the railways. It divided them into six geographical regions, largely based on the areas served by the pre-nationalisation railway companies, one of which was Southern Region. It comprised the railway operations in England and Wales of the former Southern Railway Company. Although several lines previously belonging to former railway companies were transferred to it, notably sections of the former Great Western Railway lines to Weymouth, the Midland & South West Junction between Grafton and Burbage, the Didcot Newbury & Southampton between Newbury and Windsor, and the Reading – Basingstoke and Westbury – Salisbury lines, in an attempt to remove “penetrating lines”, Southern Region kept the line from Exeter to Barnstaple and Ilfracombe, which ran through Western Region territory. This line was transferred to Western Region in 1963. Some of its commuter services and lines were transferred to London Underground. Although several branch lines closed during its existence, Southern Region, with its heavy-used passenger services, did not experience closures on the scale of other regions. Southern Region served south London, southern England and the south coast as far west as Exeter. There were three aspects to its services: those in the London commuter areas of Kent, Sussex and Surrey, its long-distance services to the West Country from Waterloo station and its international service by rail ferry jointly with SNCF (French state railways). Much of the commuter network had been electrified by Southern Region’s predecessor companies on the third-rail 660 volt direct current system. Although British Railways’ policy was to electrify on the overhead 25000 volt alternating current system, Southern Region extended its third-rail electrification in the 1960s and 1970s. Between 1948 and 1953 the regional manager was responsible to the Railway Executive for day to day operations in his region. After the Railway Executive was abolished in 1953, he reported to the British Transport Commission. In 1963, the British Transport Commission itself was abolished and replaced by British Railways Board. Between 1963 and 1968 Southern Region was a statutory board in accordance with the provisions of the Transport Act 1962, subordinate to and reporting to British Railways Board. It ceased to be a statutory board in 1968, following reorganisation of the railways’ business along functional lines. The name survived until 1992 when the railways were privatised.