- TitleEnglish Electric Company manuals
- ReferenceGEC/3/6/26
- Production date1950 - 1960
- English Electric Company LimitedBiographyBiographyThe English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.
- Scope and ContentThe box contains 4 English Electric Company manuals for Great Western Railway, Malayan Railway, the Borneo Co Ltd and diesel-electric shunting locomotives.
- Extent1 box
- Level of descriptionFILE
- Repository nameNational Railway Museum, York
- Great Western Railway CoBiographyBiographyThe Great Western Railway, also known as the GWR, was founded by Royal Assent on 31 August 1835. The idea of a railway from Bristol to London had first been mooted in 1824, and finally in 1833 a committee of four prominent Bristol businessmen, namely George Jones, John Harford, Thomas Richard Guppy and William Tothill, had joined together and provided impetus and capital for the project. It took two years to survey the line and push the necessary legislation through Parliament. The first train ran from Bristol to Bath on 31 August 1940, full services started in 1841 and in 1842 Swindon Locomotive Works started operation. The London terminus of the GWR was at Paddington station. At its inception, the GWR had a board of 24 directors which was divided into two committees based in London and Bristol. The first chairman, who sat on the London committee, was Benjamin Shaw and the first deputy chairman was Robert Bright, a member of the Bristol committee. Sir Daniel Gooch was the first Locomotive Superintendent, a post that came later to be known as the Chief Mechanical Engineer. The GWR did not have the post of General Manager until 1863, when Charles Grierson was appointed. The first Secretary was Charles Saunders. Charles Russell became chairman in 1839. The GWR’s first Engineer (a post that would later be called the Chief Civil Engineer) was the renowned Isambard Kingdom Brunel, and he held the post from March 1835 to September 1859. The GWR was overseen by a Board of Directors. At the turn of the century there were three departments under the General Manager. These were the General Department, New Works and Government Enquiries and Staff and Expenses. On the operational side of the GWR, the various different departments such as the Locomotive, Carriage and Superintendent, the Superintendent of the Line, the Goods Department and the Traffic Manager all used a similar administrative structure. These departments were headed by one manager and beneath this post responsibility was distributed into divisions based on geographical areas, which varied by department. The docks which were owned by the GWR were administrated separately from the railways under the control of the Chief Docks Manager. There were also facilitative administrative departments, as well as Hotels and Catering, Surveyor, Estate Agent, Stores departments and a Road Motor Engineer’s Department which operated the GWR’s road haulage service. Brunel insisted on using a broad gauge track, which caused problems both in the civil engineering projects to build the railway and also during operation. A Gauge Commission had been appointed in 1846 and brought about the Gauge Act of 16 August 1846 which noted the systemic advantages of narrow gauge but did not compel the GWR to convert the full length of their track. From 1846 a standard gauge third rail was added to board gauge lines. From around 1868, led by then Chairman Sir Daniel Gooch, the GWR began to convert the entire system to standard gauge, and this was completed on 23 May 1892. The main line of the Great Western Railway ran over the 118¼ miles between Bristol Temple Meads and Paddington station in London. The construction of the main line required several major engineering works. The chief among these was the two-mile long Box Tunnel between Bath and Chippenham. This challenging engineering work took around five years to complete, opening on 30 June 1841. Brunel also constructed viaducts and bridges, including the Maidenhead Bridge, opened on 1 July 1839 and the Royal Albert Bridge at Saltash which linked Devon and Cornwall across the River Tamar and which opened on 11 April 1859. The GWR had a road haulage operation, which connected with its rail freight services. The GWR also owned and operated a number of docks and harbours, and after the Grouping in 1923 the GWR became the world’s largest dock-owning company. It wholly owned 16 docks, including Plymouth, Swansea and Cardiff, and jointly owned five other docks. The South Wales ports mainly handled minerals and food, whilst passenger ships used Plymouth and Fishguard. The GWR’s docks and harbours allowed goods and passengers to transfer between rail and sea with ease. The GWR also owned its own hotels, which numbered eight by 1923. The showpiece hotel was the Great Western Royal Hotel which was connected to Paddington station. The Railways Act 1921 came into effect on 1 January 1923 and the multitude of smaller railway companies were consolidated in the Big Four. The GWR absorbed seven larger constituent companies as well as 26 smaller railways covering most of Wales, the Welsh Marches, Somerset, South Devon and Cornwall. It was third largest Big Four railway, with around 3,800 miles of track. The Great Western Railway, along with all the other Big Four railway companies was nationalised and taken over by the Railway Executive, part of the British Transport Commission from 1 January 1948. The Western Region of British Railways took over responsibilty for GWR's sphere of operations.
- Subject
Creator
Associated people and organisations
Hierarchy browser
- contains 4 partsTOPGEC GEC Traction Archive
- contains 11 partsSUB-FONDSGEC/3 Engineering records
- contains 84 partsSERIESGEC/3/6 Manuals