In 1900 the British Westinghouse Electrical & Manufacturing Co Ltd bought land in Trafford Park and built a factory which went into production in 1902 for the manufacture of mechanical and electrical equipment for the generation, transmission and use of electricity. In 1919, Trafford Park Works became owned by British Westinghouse’s successor, Metropolitan-Vickers Electrical Company (MV). The main shops, in common with factory construction throughout Trafford Park, were single floor type, with bays 1,000 feet in length, and had direct railway communication with the docks and trunk systems of the country. The main office block was a copy of the Westinghouse building in Pittsburgh, USA and the factory was to the American design and used imported steelwork for construction. Products manufactured at the Works included gas engines, stationary steam engines, electric generators, transformers, switchgear, meters, motors, control gear, and arc lamps. During the First World War, British Westinghouse built some small petrol-electric locomotives for the War Department Light Railways. In 1928 the Works were taken over by Associated Electrical Industries (AEI), which merged Metropolitan-Vickers and British Thomson-Houston, though these two companies continued their own trading names. Traction design and manufacture was always a minority of the workload at Trafford Park with the largest operations generally turbine manufacture. Very few vehicles were built there, and traction machines (i.e. motors, inductors and generators) were largely built in other places – notably at Sheffield or Rugby. Trafford Park traction manufacture was largely that of assembling control gear – contactors, switches, drivers’ controllers, camshaft controllers, relays etc. and building these into frames or equipment boxes for installation in vehicles made elsewhere. An important part of the Trafford Park Works site was the general switchgear operation, mainly for generation or distribution installations. The on-site Switchgear Testing Company was a “testing house” for these products and contributed to testing and development of traction circuit breakers and switchgear. During the Second World War MV acting for the Ministry of Aircraft Production produced more than a thousand Lancaster Bombers in the adjacent Mosley Road building. The company also manufactured war munitions and in the laboratories developed what became known as Radar. In 1959 the newly formed AEI Traction Division established its headquarters at Trafford Park, with a product range that included electric and diesel-electric locomotives; electrical equipment for tram-cars, trolley buses and trolley mining locomotives and traction motors. AEI was taken over by the General Electric Company (GEC) in 1967 whose Witton Works closed in 1969, with the design office and traction manufacture transferred to Trafford Park, as a result of the GEC reorganisation and mergers. GEC Traction Ltd took over the Works in 1972. In 1990 the former Low Voltage Switchgear site at Trafford Park (West Works) was renovated to be the new manufacturing facility for GEC Alsthom Traction, with an electronics workshop, machine shop and plating baths, and an assembly shop for switchgear, equipment cases and power modules. This building was vacated in 1998 when power modules and switchgear was moved to Tarbes in south west France. The Works housed the administrative, commercial and accounting functions, the majority of the design departments and the development section with its associated workshops and laboratories. The manufacturing area was devoted primarily to the production of components of traction control and railway signalling equipment. In 1993, as part of the rationalisation of the equipment group, it was announced that the headquarters of GEC Alsthom Traction would move to Preston, leaving only Power Module design and manufacture at Manchester, with the eventual closing of all activities at Trafford Park in 1998. The iconic original Westinghouse building was demolished and the site is now (2015) largely devoted to container handling and logistics operations.

The British Thomson-Houston Co. Ltd., (BTH) was created as a subsidiary of the General Electric Company, USA in 1896 to exploit the sale of products in the United Kingdom. BTH was a reconstruction of an existing firm, Laing, Wharton and Down (1886). The BTH manufacturing works were based at Rugby, Warwickshire and the company’s products included induction motors, alternators, switchgear, turbo-generators and turbines, as well as a large number of rotary converters and motor converters, primarily for chemical plants. During the First World War, BTH’s most significant contribution was the development of marine apparatus for the naval service. The 1920s saw a period of vast expansion for the company with new extensions built at many of its factories such as Willesden, Birmingham, Chesterfield and Lutterworth. BTH amalgamated with Metropolitan-Vickers Electrical Company Ltd to form Associated Electrical Industries (AEI) in 1928 although both companies retained their separate identities and continued to compete for the same contracts. BTH developed manufactured electric torpedoes and electrical components for aircraft engines, munitions, etc., during the Second World War and in 1935 independently of each other, BTH and Metropolitan-Vickers were the first two companies in the world to construct jet engines.

In 1948 the Kenya Uganda Railways & Harbours and the Tanganyika Railways & Port Services were merged and became the East African Railways & Harbours Corporation. In 1956 the EAR&H extended the Uganda Railway from Kampala to Kasese and to Arua in 1964. In 1977 the East African Community dissolved and EAR&H split into three national railways; the Uganda Railways Corporation, Tanzania Railways Corporation and Kenya Railways Corporation.

In 1910 the state-owned South African Railways and Harbours (SAR&H) organisation was created, after the four colonies of the Cape, Natal, Transvaal and the Orange Free State were amalgamated into the new Union of South Africa. In 1916, SAR&H took over the activities of the Central South African Railways, the Cape Government Railways and the Natal Government Railways. In 1924 the last privately owned railway line in South Africa was taken over by SAR&H; the New Cape Central Railway between Worcester and Voor Bay. In 1920 electrification of South Africa’s railways was completed, and in 1924 the first electric test train ran between Ladysmith and Chieveley in Natal. In 1950 the first portion of the new Johannesburg station was opened and construction was completed on the huge workshops complex at Koedoespoort. In 1960, diesel locomotives were introduced on a large scale to SAR&H. In 1981, SAR&H changed its name to South African Transport Services (SATS) and took on South Africa’s railway, harbour, road transport, and aviation and pipeline operations.

The British Railways Board was an independent statutory corporation responsible for running the British railway network from 1963. It was established by the Transport Act 1962, which abolished the British Transport Commission and divided its undertakings between five newly-created bodies: the British Railways Board, the British Waterways Board, the British Transport Docks Board, the London Transport Board, and a Transport Holding Company. The British Railways Board was responsible for running the railway network, as well as managing government-owned railway hotels. Members of the British Railways Board were also appointed by the Minister for Transport. The first Chair of the British Railways Board was Dr Richard Beeching. The British Railways Board operated through regional boards, which were responsible for regional sections of the railway network. These regions were Southern, Western, London Midland, London and North Eastern, Eastern, and Scottish. Members of these regional boards were appointed by the British Railways Board, in consultation with the Minister for Transport. The British Railways Board also operated a series of committees to manage every aspect of railway control, including committees for finance, technical, works and property. These committees were frequently reorganised throughout the life of the British Railways Board, under both different Chairs of the Board and different governments. Several changes occurred during the 1960s. The Board had two new Chairs; Stanley Raymond, who replaced Richard Beeching in 1965, and his successor Henry Johnson, who became Chair in 1967. In 1968, the Transport Act transferred the control of the Sundries and Freightliner divisions from the British Railways Board to National Carriers Ltd and Freightliners Ltd. The Board retained a forty-nine per cent stake in Freightliners Ltd. During the 1970s, the British Railways Board created several subsidiary companies which were to manage some of its undertakings. These included British Transport Hotels Ltd, British Rail Engineering Ltd, and British Rail Hovercraft Ltd. Many of these subsidiary companies were sold under the Conservative governments of the 1980s. There were also two new Chairs during this time. Richard Marsh replaced Henry Johnson in 1971, and Peter Parker became chair in 1976. The privatisation of the British rail network during the 1990s radically changed the role of the British Railways Board. The Transport Act 1993 established Railtrack, a publicly-owned company. The Act transferred the ownership of track and railway infrastructure from the British Railways Board to Railtrack, in addition to the control of signals. Railtrack also replaced the British Railways Board as the body responsible for track investment and maintenance. The British Railways Board remained in existence after these changes, but only performed residual functions relating to pensions, liabilities, and non-operational railway land. The Board also continued to operate the British Transport Police service. The British Railways Board was abolished by the Transport Act 2000, which transferred the remaining functions of the Board to the newly-created Strategic Rail Authority.