The English Electric Company was formed on 14th December 1918 and over the following year acquired Dick, Kerr & Company of Preston, Willans & Robinson of Rugby, the Phoenix Dynamo Manufacturing Company of Bradford, and Coventry Ordnance Works. After the First World War the various German owned Siemens works were distributed to different UK companies and in November 1919 English Electric acquired the Siemens Brothers Dynamo Works at Stafford, which became the company headquarters in 1931. Coventry Ordnance, primary output naval guns, did not feature in the gradual product rationalisation which took place between the First World and Second world Wars. Willans & Robinson’s Rugby works specialised in prime movers, steam, hydro and internal combustion, and their Stafford works on power station and distribution electrics, including transformers and large electric machines for applications such as mining and steel works. Dick Kerr & Company continued building equipment and vehicles for bus, tram and railway applications with the Phoenix Dynamo Manufacturing Company concentrating on medium and small electrical machines. Involvement with aircraft continued a small scale. By 1929 the company was in financial trouble and an American syndicate fronted by Lazard Bros. put in new capital. In 1930 Westinghouse of Pittsburgh entered into an agreement with the company for the exchange of technical information relating to steam turbines and electrical apparatus. This cooperation continued into the 1950s. 1930 saw the closure of Preston West works and the transfer of traction electrical design and manufacture to the Phoenix Dynamo Manufacturing works. The Westinghouse influence included top management changes with Sir H Mensforth becoming chairman and George Nelson managing director. Both had been with British Westinghouse at Trafford Park. The early 1930s saw a remarkable improvement in the company’s finances and domestic appliance manufacture was started at Bradford and Stafford. In 1936 they began production of diesel locomotives at Preston and were later involved in the production of the Deltic locomotive for British Rail, presaging the end of steam traction in the UK. Extensive shadow factory building for war production commenced in the late 1930’s, including at Preston East works and Salmesbury for aircraft production and at East Lancashire Road, Liverpool for D. Napier aero engines. A large variety of military equipment built during the war included thousands of Cromwell tanks from Stafford and over 3000 Handley Page Hampden and Halifax bombers from Preston and Salmesbury. After the war manufacture of smaller products from Bradford and Stafford moved to the large Liverpool works. This included electrical distribution transformers, switchgear, fuse gear, fractional horsepower motors and domestic appliances. Napier’s continued engine manufacture with the development of the ’Deltic’ diesel engine, mainly for marine applications. The nearby Netherton works took over the manufacture of large hydro-electric turbines and generators from Willans and Stafford. In 1942 English Electric acquired D. Napier & Son Ltd and Marconi in 1946. The company went on to extend their railway interests with the acquisition of the Vulcan Foundry and Robert Stephenson and Hawthorn Ltd in 1955. The company tried to take over The General Electric Company (GEC) in 1960 but failed. Traction manufacture, but not the offices, moved back to Preston East works and ‘K’, ‘RK’ and ‘V’ engine design and manufacture moved from Willans to Preston West works which was now also used for locomotive building. Kidsgrove works in Stafford made industrial controls and for a while was a major player in the UK computer industry, merging with Leo Computers and then into ICL. Train performance calculations were an early user of the mid-fifties ‘Deuce’ computer. Preston also became a major player in the aircraft industry taking over the wartime RAF/USAF base at Warton aerodrome - major design and manufacture contracts included Canberra bombers and Lightning fighters. Rationalisation in the 1960s resulted in English Electric Aviation becoming 40% of the new British Aircraft Corporation. In 1961 English Electric took over Dorman Diesels Ltd which in turn had acquired W. G. Bagnall Ltd. In 1966 English Electric Diesels merged with Ruston and Hornsby which already included Paxmans. This company eventually became GEC Diesels. Elliott Automation was acquired in 1967. The following year GEC took over English Electric, ending its independent existence.

The Phoenix Works in Bradford were owned Phoenix Dynamo Manufacturing Company of Hubert Street, Leeds Road in 1895 manufacturing arc lamps and electrical instruments. By 1900 the company works were manufacturing small motors and dynamos for driving machinery and providing lighting specifically for the textile industry. Large motors, turbines, turbo-generators etc. were manufactured for orders from the Admiralty and War Office. During the First World War, the works produced millions of shells, a large quantity of machine tools, sea planes and flying boats. In 1918 these works became the English Electric center for small to medium sized industrial AC and DC motors and generators including fractional horsepower machines and also eventually a specialised unit manufacturing generators and motors for aircraft applications. In 1930, the Dick, Kerr West Works at Preston closed and Traction electrical design and manufacture transferred to Bradford. Some key staff left and joined Crompton Parkinson. Important traction work included motors and generators for early diesel electric applications and continued manufacture of Metrovick designed motors for the Southern Railway. After the Second World War, most of the traction manufacturing transferred to the Preston East works factory but the design and commercial offices remained at Bradford until 1967. Some traction and associated military manufacturing work continued including conventional submarine control gear and pulse generators for mine sweepers. The Aircraft Equipment Division merged with Lucas Aerospace and left Bradford in the 1970’s and industrial machine manufacture ceased in the 90’s with complete closure in 1999. A B&Q store occupies the former Traction part of the site. An office block built in the 1950’s is all that remains of the factory.

The Great Indian Peninsular Railway (GIPR) came into existence on April 16, 1853, with the line running from Bombay to Kalyan. The aim was to open a channel to transport trade from cotton growing districts to beyond the Ghats. The GIP Railway was purchased by the Government of India on 1st July 1900 and amalgamated GIP with the Indian Midland Railway. In 1951 the GIPR combined with the Nizam Guaranteed State Railway, Dholpur State Railway and the Scindia State Railway to form a zone of Indian Railways named Central Railway.

Tasmanian Government Railways (TGR) was formed in 1872 after it began to take over failing privately owned railway lines with its headquarters in Launceton, Tasmania. TGR owned lines ranging from Deloraine, the North West Coast, Hobart and Launceton to Antill Ponds and Turnbridge. In 1978 TGR was amalgamated with the Commonwealth Railways, South Australian Railways to form the new Australian National Railways Commission, operating as Tasrail.

In 1851 the Regent of Egypt and Sudan, Abbas I, contracted Robert Stephenson to build Egypt's first standard gauge railway. Construction began on the line in 1851 and in 1854 a section was opened from Alexandria to the village of Kafr El-Eiss. In 1856 the entire single track line was opened with 12 stations including the main stations of Cairo (constructed in 1855) and Alexandria (constructed in 1854). In 1919, the railways became entrusted to the Ministry of Communications and in 1953, Egypt became a republic and Egyptian State Railways changed to become Egyptian Republic Railways.

A site on the east side of Strand Road had been intermittently used for railway work since the 1840’s. In 1898 the Electric Railway and Tramway Carriage Works Ltd (ER&TCW) took over the site. This company had strong links with Dick Kerr & Co. The building of Preston Dock in the 1880’s had involved the diversion of the river Ribble and associates of Dick Kerr & Co built the factory building which still stands on the west side of Strand Road in 1900. This site occupies the space between the road and the original river bank. The two sites became a major centre of tram building and electrical equipment manufacture. Dick Kerr & Co took over the West works in 1903 and ER&TCW became the United Electric Car Company in 1905. A major early railway contract was for the electrification of the Liverpool Southport line of the Lancashire and Yorkshire Railway in 1904. The two factories continued in close association until they merged into English Electric in 1918. Military equipment and Seaplanes were built during the First World War and the Dick Kerr & Co Work’s Ladies became a famous football team at that time. Non railway electrical work was gradually transferred to other English Electric factories in the 1920’s. Besides continuing tramway business, major orders for Japan and France helped to establish electric traction industries in those countries, the Tarbes factory continues as a main unit in the Alstom group. A complete electrification scheme was supplied for the Arthur’s Pass line in New Zealand. 1930 saw the transfer of the traction electrical work to Phoenix, Bradford and the closure of West works until the late 30’s. East works continued making buses and trams including a large order for Blackpool. Early diesel electrics became a speciality and shunter contracts with the Willans built 6K engine for the LMS and others were very successful and formed the basis of large orders after the Second World War. In the late 30’s East works open yards and some surrounding properties were built over to form a large aircraft manufacturing site and with West works produced over 3000 Handley Page bombers during the war and just post war, DeHavilland ‘Vampire’ jet fighters. After the war most traction electrical equipment manufacture (but not the offices) was moved from Bradford to East works and ‘K’, ‘RK’ and ‘V’ engine manufacture moved from Willans, Rugby to the West works which also took on diesel and electric locomotive manufacture. Aircraft manufacture continued in both works with large orders for Canberra bombers and Lightning fighters. Final assembly was at Salmesbury and Warton aerodromes. Some locomotive manufacture was subcontracted to Vulcan from the late forties. Notable orders included large Electric locomotives for Spain and the ‘5E’ for South Africa. This locomotive was the basis of subsequent large orders for ‘5E1’ and ‘6E’ equipments produced by or in conjunction with AEI and GEC Traction. The prototype ‘Deltic’ was produced before the takeover of Vulcan and Robert Stephensons in 1955, when all locomotive production was quickly moved to those sites. Most of the diesel engines for the large number of locomotives supplied under the British Rail modernisation plan were made in West works. Aircraft production continued in both works until the formation of the British Aircraft Corporation in the mid-sixties. East works was transferred to BAC and diesel engines moved to Vulcan. The full range of traction equipment manufacture then took over West works and the offices moved in from Bradford in 1967. BAC closed East works in the early nineties and the factory was demolished. Four years after the merger with GEC in 1968 the former English Electric and AEI traction offices were reorganised with commercial and control gear at Trafford Park and machines at Preston. Production locations remained unaltered until the closure of Attercliffe, Sheffield in 1985. Semi-conductor technology gradually changed the product range in the 1980’s with GTO’s and IGBT’s enabling ac induction motors to take over from dc in the 90’s. Over 5000 EE507 dc motors were made for BR Southern region over a period of nearly 50 years. After the merger with Alsthom in 1989 the Trafford Park operation was gradually closed down and all offices and production were moved to Preston in the mid-nineties. Some buildings were demolished and others refurbished. Major orders for ac motor equipments included BR classes 465 and 365, ‘Eurostar’ motors and ‘common’ blocks, Korea, London Underground ‘Jubilee’ and ‘Northern’ lines and Virgin ’Pendolino’ and ‘Voyager’ trains. Most of the motors for these last two were made at Ornans, France after the closure of new motor manufacture in 1999. After 2003 only a small design and drawing facility remained, concentrating on repairs and modifications to existing rolling stock The site remains open as part of Alstom Transport’s Train Life Service business for the manufacture, repair and overhaul of traction control equipment and rotating machines, and as a spare parts distribution centre. BAE systems have occupied some offices on the site since 2006 as tenants of Alstom. Today, the factory is still operating on a reduced scale, only employing about 200.